WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
How to Replace Windshield Washer Pump 1995-2005 Chevy Monte Carlo
Created on:
Tools used
Flat Blade Screwdriver
Jack Stands
7mm Socket
Drain Pan
Ratchet
Floor Jack
1. Removing the Windshield Washer Pump
Remove the two 7mm bolts from the inner fender
Remove the three 7mm bolts from the bottom of the bumper cover
Pull down the splash shield
Disconnect the washer fluid level sensor wiring harness
Disconnect the washer pump wiring harness
Have a drain pan ready
Pull off the washer hose
Allow the washer fluid to drain
Pull the pump out of the washer bottle
Pull out the washer pump grommet
2. Installing the New Washer Pump
Install the new washer pump grommet
Connect the washer pump wiring harness
Push in the new washer pump
Connect the fluid level sensor wiring harness
Put the splash shield into place
Insert the three 7mm bolts into the bumper cover
Insert the two 7mm bolts into the inner fender
Refill the washer fluid
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we are going to show you how to replace a washer pump on this 2003 Chevy Monte Carlo and it's the same part and similar process on this Monte Carlos from 2000 to 2005 and the items you'll need are a new washer pump from 1AAuto.com, 7 millimeter socket and ratchet, flat blade screwdriver, drip pan and jack and jack stands.
Start of by removing these two 7 millimeter bolts. Now, remove these three 7 millimeter bolts right here. Now, pull this panel to the side and down and your washer bottle and washer pump are right here. Reach up and disconnect the harness for both the level sensor and the washer pump and then just pull the washer hose free and let it drain out into a drip pan. When you let it drain out, then you need to pull your pump out and it pulls out at the top and then up and out of the washer bottle and more fluid will drain out. Make sure you take out the old grommet that's in the washer bottle and insert your new grommet into the washer bottle and then reverse the process.
You can reconnect your pump first and then put it down into the washer bottle grommet first and then clip it in at the top, and then reconnect your other connections. We'll just fast forward as Mike replaces those five 7 millimeter bolts. Once those are replaced and tightened up you are all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
WWA06633
In Stock
Product Reviews
Loading reviews
4.50/ 5.06
6 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
4
1
1
0
0
Michael
December 14, 2022
Excellent
Windshield washer pump
Dean
December 27, 2022
The videos are a real help for me , not use to working on the newer cars and trucks. The part was top quality and delivered fairly soon. I will keep using 1A auto.
Cheaply made product.
John
March 9, 2023
The hose connections should have been made with a more ridged plastic instead of a soft plastic. I'll buy else where for next one#
Jerone
March 16, 2023
????
Problem solved.
Melanie
June 16, 2024
Solved the problem with windshield washer.
Joseph
November 13, 2024
Easy-ish to install & works as needed. Sight looseness in fit compared to the original but that had been in the truck 20 years so who knows how it fit originally. This replacement works fine & has so far stayed in place just fine.
Customer Q&A
In the video for the 08 CTS, the tech said it was a windshield washer pump at the beginning. Then for the reinstall, he called it a headlight washer pump. Which is it??August 5, 2022
John D
10
This part is for a windshield washer pump.
August 5, 2022
Andra M
Does this work for both sides because there are two of them on the suv?August 15, 2024
Maurice C
10
Yes, this will replace either windshield washer pump.
August 15, 2024
Andra M
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Chevrolet is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Chevrolet or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.