WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Cabin Filter 2010-13 Toyota Prius
Created on:
Tools used
No Tools Needed
1. Removing the Cabin Air Filter
Open the glove box
Press the pistons to release the glove box
Unclip the glove box
Press the lock tab on the cabin air filter cover
Remove the cabin air filter
2. Installing the Cabin Air Filter
Insert the cabin air filter into place
Press the cabin air filter cover on
Clip in the glove box
Press the glove box pistons in
Close the glove box
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
To get to the cabin filter, we're going to open the lower glove box. You'll probably want to empty it, because on this side there's a small little piston. Just pop it off and then you'll push in on this side here. It's entirely possible it will unclip from the dashboard too. It's not really a big deal, it's just plastic clips underneath. You can actually pop it right off, get it out of the way. Inside here is your cabin air filter. Push this lock tab in. Open up the little door. Pull the cabin air filter out. That was actually not too bad.
Here's the original cabin air filter and a brand new one from 1AAuto.com. Same exact size, style. This one will fit great and work great for you. Take the new one and it slides right into the opening. Take our cover and capture the tab on this side. Push it right over. There’s an arrow pointing up. Grips into place. This parts complete. Take the glove box and clip it back on. Lift it up. Push up into place, and it's on the locks and then reinstall the little shock. Just like that. Job is complete.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
CFA18277
In Stock
Product Reviews
Loading reviews
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Toyota is a registered trademark of Toyota Motor Corporation. 1A Auto is not affiliated with or sponsored by Toyota or Toyota Motor Corporation.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.