Replaces
Frequently bought together
Returns: Parts with electrical components cannot be returned once installed.
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
ESA53537
The sensor works with the vehicle’s ECU, continually monitoring the coolant temperature to make sure the engine is running at the optimum temperature.
Item number, 1ATSU00017, is listed to fit the 1998 Ford Expedition.
Currently, we do not carry this part for your vehicle. We're always updating our inventory so please check back soon!
Thank you for the inquiry. The location varies from vehicle to vehicle but most commonly it will be on the engine block itself, there should be a provision this goes into with the electrical harness that attaches to it.
This should be located under the dash but we do not have a diagram at this time showing the exact location. Please do not hesitate to contact us with any further questions.
The socket size would be the same as the original.
I have a 1999 Ranger XLT 3.0L, my temp. sensor was on and around thermostat housing area in front of intake manifold. I broke one when repairing engine for blown cylinder head gasket, my engine has two temp. sensors, one for temp. gauge and other I believed for computer input? I'm a marine technician and try to do as much as possible on my own within my ability. Hope this information is helpful to you.
