2015 Nissan Pathfinder Dual Radiator & Condenser Fan Assembly TRQ RFA90239

Product arrived in great condition very quickly. One 1aauto was great to deal with. Vacation saver!!

Perfect fit and function for a 2015 Pathfinder. When installing remove the relay box for clearance then reinstall.

MyExperience. Shipping as very good. Part fit great. Appears to be of good quality. Been in the car 2 weeks. No problems. When I need more parts I'll give them the 1st shot at it.

Working perfect! Thank you

Onces is running automatic on never shut-off the cooling fan. And its kinda loud sound and never stop the fan until turn off the engine.

Part fits and works just fine

Just installed it on my 2015 Pathfinder. Fits good and works great so far. Fan noise is not bad at all. Here is my video: https://youtu.be/FvLL01frdco Hope this one will work great for long time.

Definitely fix the problem

The fan assembly was nicely packaged and arrived in good working condition. The item looked to be of good quality however I was not satisfied with the screws that held the fan module. These stripped easily and 2 screws had different heads (+ and -). I would not complain about the screws if I did not have to remove and tighten them back again. However, before installing the assembly this module needs to be removed and installed again once the fan is inserted. The clearance between the engine and radiator is very tight. The original Nissan Infiniti has a 10mm head (6 point) bolt that holds the fan modules and the screws are easy to remove and install. This assembly has a small tiny Phillips head screw and the head strips easily. The module size is also smaller in dimension compared to OEM design and does not align with the screw holes. If atleast the screw holes aligned I would then use the original screws but couldnt. Thus giving only 3 star.

Did what it needed to

I bought this for my 2016 Infiniti QX60. Like one of the other reviews, once I turn the car on, the fan won't shut off until the engine is off. I contacted customer service to let them know of the problem because it is loud and annoying and they said it was probably some other issue with my car, which I know it's not. I will be buying another one from somewhere else to fix the problem. Hope this helps.

Please please please, look elsewhere to purchase this part. It will run continuously once ignition is on, never stops. I tried swapping the fan relay out also with aftermarket one. Save your self the headache and find the fan assembly elsewhere and use your old control module. Unless it's shot. My issues was bad bearing noise. Just make sure it's the exact same wiring connectors. The OEM fan and module will run you about 600 bucks online from Nissan or 1k direct from dealer. 1A auto was nice enough to send a new fan out no charge. That added headaches because control module was not issue as customer service stated. Your ecm will not like anything but OEM control module.

Good product

I do like it it fit perfect and is working just fine

Well I was a little uncertain about installing this fan in an Infiniti QX60 but after seeing a Youtube video and then later the video that TRQ provided to 1A Auto, I felt comfortable with this procedure. There were some minor difference in my vehicle and the one in the Videos but it all went well and is working like a charm. Have the proper tools is also advisable as there are some precarious bolt locations to get to. The original equipment fan has a poorly designed bearing mount and this is why it went bad at only 60,000 miles, very disappointing but glad 1A Auto had the part and information to do this repair at a reasonable cost.