Replaces
Frequently bought together
Returns: Parts with electrical components cannot be returned once installed.
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the power mirror switch on this 2004 Nissan Titan, and the only tool that you're going to need for this is a flat blade screwdriver.
Start off by prying on the side of your switch pack and you want to pull up from the front and then slide it forward, pull it out, and then push the tab on each of these harnesses and pull them free. Now, pry out the four tabs holding in your mirror switch: these two on the bottom, two on the top. Then the mirror switch will pull out.
Take your new mirror switch and push it into place, reconnect those harnesses, and then slide this tab back underneath here, and then push the front down, and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the driver side switch pack on this 2004 Nissan Titan. The only tools you'll need for this is a flat blade screwdriver and a Phillips screwdriver.
Start off by prying on the side of your switch pack. You want to pull up from the front and then slide it forward. Pull it out and then push the tab on each of these harnesses and pull them free.
Now, remove these three Phillips screws. We'll fast forward as Don does that. Once those are removed, you can just pull it up and out.
Push your new switch pack down into place and replace and tighten up those three Phillips screws.
Reconnect those harnesses. Then, slide this tab back underneath here and then push the front down. You're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
SWA60354
