1AEIM00023-Ford Upper Intake Manifold TRQ IMA07939
false

Replaces

29

2007 Ford E250 V8 5.4L Upper Intake Manifold TRQ IMA07939

00-14 Ford Truck SUV Van 5.4L Upper One Piece Intake Manifold
recommended installation videos
sponsored by trq-logo
$ 174.95
$208.95
16% OFF
$208.95
16% OFF
FREE SAME DAY SHIPPING
TRQ
IMA07939
In Stock

This part doesn’t fit a . Select from parts that fit.

Show parts that fit
Specify your vehicle

Specify your vehicle's year, make and model to guarantee fit.

Year
Make
Model
Options
Drivetrain

If your vehicle isn't listed, search Intake Manifold


Orders must be placed by 2pm ET
1A Auto Lifetime Warranty

Enter your zip code


Frequently bought together

00-14 Ford Truck SUV Van 5.4L Upper One Piece Intake Manifold
2007 Ford E250 V8 5.4L Upper Intake Manifold TRQ IMA07939
$174.95
OBDII Multilingual Scan Tool
OBD2 Diagnostic Scan Tool
$51.95
Specify your vehicle

Specify your vehicle's year, make and model to guarantee fit.

Year
Make
Model
Options
Drivetrain

If your vehicle isn't listed, search Intake Manifold

TRQ
IMA07939
In Stock
Product Reviews
Loading reviews
4.28/ 5.0 29
Works Fine
X
September 26, 2017
Even thought it was a little smaller in size than the OEM, the mechanic had no problem installing it. I arrived quickly!
Great fit
S
March 6, 2018
The after market design was a perfect fit, I recommend using it. It took about 2 hours to install with all accessories..
Dorman intake manifold for 2001 f150 5.4
Nicholas
April 19, 2019
Came just as promised... It is a direct replacement for the original ford manifold... Installed myself... Fit perfectly... I've read other people say they lost power with it... I have not noticed any power loss, if anything it seems to have a little more power... Noise wise, it may be just barely louder, but really not noticeable.... Would buy again...
Exact fit
Gary
June 24, 2019
Ordered this intake for my 2002 F150. Item arrived very quickly. Install was pretty straight forward with no issues. I especially like the fact that the gasket was already incorporated into the intake. I also replaced my valve cover gaskets during this install. Customer service was very responsive when I had a question about the intake prior to purchase. Gary B.
Needed bad
J
August 27, 2019
Perfect replacement. Fast shipping. No hassles
Roberto
September 20, 2019
my parts came in fast, and they were the perfect fit.
Working Good
GEORGE
October 14, 2019
Replaced this about a week ago. Gaskets sealed well, and no problems as of yet. Bet part about it is it was half the price of all my local parts houses.
D
November 16, 2019
fits great on my 2001 f150 5.4, don't like the way the nipple for the pcv hose fits into the intake manifold.
Perfect fit and works great
R
December 21, 2019
The part was a perfect and works great
Replacement intake
Timothy
January 24, 2020
The part came with in days . It fit without changing any bracket and had everything needed to do the job . I didnt have any problems and was a great savings on price.
5.4 Triton upper intake manifold
Rodney
April 4, 2020
Had to use a drillbit on one holes side that holds the fuel rail. You guys coated thread locker on the entire threads on the screw that is on the crossover to the right of where the alternator, pain in the butt to get off .should have came with instructions especially for the torque pattern (had to find online). But overall part works fine and gives a little more room in the engine bay. Be careful when tightening the self threading screws to the plastic. Make sure they go in straight.
Works but not perfect.
J
April 10, 2020
Was missing rear mount holes for rear injector screw mount. I drilled out to correct. But when it was tighten down the injectors leak badly. Had to shim with washers to correct. Otherwise it is a good part.
PCV connection is terrible
Paul
April 18, 2020
The PCV connection nipple is a serious design flaw. It should be molded to the manifold like the stock part. This aftermarket unit has a separate PCV connector that twists in and attaches with an o-ring. Its been a source of a vacuum leak since I installed the manifold. I've had to take the throttle body off several times to get to the area to try to repair it. It may be an issue in the molding of unit that I received. IDK. It just doesn't fit right. I plan on using epoxy to hold the PCV connector nipple into the manifold, in an effort to cure the leak once and for all. With all of the time that I've wasted on this, I should have just bought the OEM Ford Manifold for the extra 100 bucks. Live and learn. I love 1A Auto, but I am really not happy with this manifold.
Intake
C
May 9, 2020
Received my parts in a timely manner ,everything worked great
Intake manifold
Shane
August 4, 2020
Shipping was amazing fast, product packaged very nicely
intake manifold
clyde
August 11, 2020
The job was easier than expected
Upper Intake manifold
Rigoberto
October 13, 2020
Fast shipping so far so good It's been couple month since I installed. The self tapping screws for the pack coil need to be more standard size And have more grip for the shocked, overall everything is going well.
Great fit, works well
Thomas
January 11, 2021
It was a perfect fit for my 5.4 triton engine. The videos provided helped immensely. And that is why I purchase from 1A Auto. The reason why it wasn't 5 out of 5 was because the thermostat that came with it wasn't opening. It hit 212 F and it got me really nervous. Unless I was mistaken, I thought it was 185 F to 190 F when it would open. So I just purchased a fail open, and went on my way.
Don't buy this manifold
B
March 7, 2021
I found that the manifold fit ok, but I would not recommend this manifold. The main bolt holes have insects for the bolts but the remainder of the hold down locations are plastic only with crapy low tensile strength screws that snap off and cause severe problems trying to get them out, and don't ever use any power tools to install them.
Joel
August 16, 2021
Worked great for For F150 Ford XLT 5.4. Screws were pretty cheap so the heads busted off with only minor torque from handheld screwdriver but I had some replacements
Nicholas
October 23, 2021
Part fit great fast shipping. Kicker idk if the t Stat is opening. Truck currently throwing white smoke now after install.
Intake manifold F-150 5.4 L
Leonard
November 20, 2021
Great! Part works great! Thanks!
Good product and service
Jeremiah
October 6, 2022
Customer service was great came missing a part and they sent a new assembly immediately. Uses new hardware which is all provided. Would order again
Shirley
October 8, 2022
Prompt delivery
Poor hardware quality.
Kevin
December 10, 2022
The hardware is poorly made. I broke a screw head before even torquing it to spec. It would have helped if the kit came with extras for those sort of problems. Caused me to have to take the intake completely back off to get the broken screw out.
Jacob
January 4, 2023
Hardware is horrible. Broke a total of 3 screws before being torqued down. Very upset. I will have to remove the entire intake just to get the screws out.
Larry
November 26, 2023
Work good.
Jaime
January 4, 2024
Excelente
2000 F150 5.4 triton
Jake
August 28, 2024
Part fit perfect on my 2000 ford f150 with the 5.4 triton. I was replacing the original motorcraft intake because it broke at the coolant crossover. One tip that I couldn't find anywhere is this part comes pre fitted with individual gaskets that go between the intake and the heads, the original intake just has 1 big gasket for each side so make sure to remove those before installing the new. But the new intake is much quieter! It's very nice.
Customer Q&A
USA made?
August 23, 2017
Frank R
10
These are built in either Taiwan or China.
August 25, 2017
Alex P
Why is the lower manifold so much smaller then oem version? Will that decrease my trucks performance?
September 24, 2017
Will F
10
You will not encounter a decrease in the truck's performance. Our vendors created an upgraded design due to common failure points on the OE design, but made them to exceed the OE style specifications.
September 25, 2017
Alex P
10
It will not change the performance. It looks smaller because the aftermarket one comes as the full unit and deleted casing that the oem one sat in. Just sets right in, and also deleted the need to have to take out the entire middle to get to it.
September 25, 2017
Justin J
10
No u will get the same performance that the truck always gat. I was concerned about that also when I bought mine but after putting it on and seeing it work I got the same performance that I got with the OEM version
September 25, 2017
Lemuel A
Do I remove the old gasket that's stuck on the cylinder head and then just bolt this unit straight on the head?
February 14, 2018
Robert B
10
Thanks for your question! You will want to completely remove and clean the mounting surfaces to allow the new gasket to seal properly. Thank you!
February 15, 2018
Adam G
10
yes and there are great u tube videos just type in how to replace a ford intake manifold there one that a ford guy take you throw the hole job
February 16, 2018
Jeffery K
10
Remove old gaskets, clean mounting surface. Unit has gaskets manufactured in. Then just bolt in place
April 6, 2018
V R
Will that fit a 4.6 V8?
May 3, 2018
R M
10
No this will not fit a 4.6L engine.
May 3, 2018
T I
Will this fit a 2004 F150 5.4 3V?
July 25, 2018
Jason M
10
This is only listed to fit 2004 Ford F-150 Heritage Models. It will not fit your vehicle if it is not a Heritage Model.
July 25, 2018
Christa R
Does this set come with the intake gaskets as well with the crossover gaskets?
October 16, 2019
Armando V
10
Yes it does. The gaskets are built into the manifold and crossover. I installed this intake manifold on a 2001 Ford Expedition a couple years ago and have had no issues with it.
October 17, 2019
Robert T
10
This will come with the intake manifold gaskets already molded on. Please let us know if you have any further questions.
October 17, 2019
Emma F
How ft. Lbs. Of torque is recommended?
March 19, 2020
Ken B
10
Tighten intake bolts as follows: Stage One: 2 Nm (18 in-lbs) Stage Two: 25 Nm (18 ft-lbs) an answer to this question.
March 19, 2020
Brittanua C
10
Thanks for your inquiry. Written and video installation instructions are found on the product page under the "How-To & Tools" tab. We're constantly adding new installation video instructions. If we do not have one for your vehicle on the product listing page, please check again at a later time or check our Video Library to see similar repairs here: https://www.1aauto.com/videos
March 19, 2020
Emma F
The part that the PVC hose hook to on the back of the intake do you sell it separate from the intake?
April 18, 2020
Clayton L
10
Currently, we do not carry this part you are looking for. We're always updating our inventory so please check back soon! If you have any other questions, let us know.
April 18, 2020
Jessica D
Why I'm constantly being shown intake for 5.4l when I'm asking for 4.6l?are they compatible?
April 19, 2020
Sean W
10
Thank you for your inquiry! No, this item is not compatible with the 4.6L engine. If you would like us to see if we offer the correct intake manifold please contact back wit your year make and model so we can further assist you, thank you.
April 19, 2020
Jessica D
Does fitting on back of intake suppose to be loose or tight?
January 18, 2021
V P
10
This part has multiple seals and should be air tight. Nothing should really be "loose."
January 18, 2021
T I
Does this intake manifold fit a 5.4 liter 99f150?
April 4, 2022
John D
10
If it's the Triton v-8, yes it fits
April 5, 2022
Shane Y
10
No, this part will not fit on the 1999 Ford F150.
April 5, 2022
Andra M
What is the best manifold for the 5.4 l motor?
August 6, 2022
Frank S
10
Bought Dorman made of plastic for about 60% cheaper than original ford and never regreted it. Did 2 on my both F150
August 8, 2022
Tomas D
Will this fit 99 expidition 5.4l ?
May 1, 2023
Alex R
10
This part will not fit your vehicle, but we may have a part that is listed to fit. Please enter your vehicle's year make and model in the search bar at the top of the page. This will display parts guaranteed to fit your vehicle. Just be sure to verify all of the information shown in the Vehicle Fit tab before ordering.
May 2, 2023
Jean O
Is this a Dorman product?
September 16, 2023
Alan E
10
This is not a Dorman product and made by the company TRQ.
September 20, 2023
Emma F
Why is the PCV nipple so much smaller than OEM manifold?
June 11, 2024
Joseph M
10
Our parts are exact replacements for your vehicle's OEM parts. As long as your vehicle specifications match up with our listing, these parts will directly fit and function like the originals.
June 11, 2024
Kemal S
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Ford is a registered trademark of Ford Motor Company. 1A Auto is not affiliated with or sponsored by Ford or Ford Motor Company. See all trademarks.
Enter Vehicle Year Make Model

Specify your vehicle's year, make and model to guarantee fit.

Year
Make
Model
Options
Drivetrain

This part doesn’t fit a . Select from parts that fit.

Show parts that fit
Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.

Before proceeding,

select your Vehicle, to verify this Part will fit.

If your vehicle isn't listed, search Intake Manifold

This part will only fit a 2007 Ford E250 with these options.

If your option isn't listed search Intake Manifold

Before proceeding,

select your Vehicle, to verify this Part will fit.

If your vehicle isn't listed, search Intake Manifold

This part will only fit a 2007 Ford E250 with these options.

If your option isn't listed search Intake Manifold