Replaces
Replaces Ford Mazda Rear Driver & Passenger Side Leaf Spring 2 Piece Set Dorman OE Solutions 1ASFK01704
$515.95
Replaces Ford Mazda Mercury Front 12 Piece Steering & Suspension Kit TRQ PSA65045
$369.95
Replaces Ford Mazda Mercury Front 10 Piece Steering & Suspension Kit TRQ PSA63360
$359.95
Replaces Ford Mazda Mercury Front 12 Piece Steering, Suspension, & Drivetrain Kit TRQ PSA34488
$350.95
Replaces Ford Mazda Mercury Front 8 Piece Steering & Suspension Kit TRQ PSA63544
$344.95
Replaces Ford Mazda Mercury Front 6 Piece Suspension Kit TRQ PSA63635
$319.95
Replaces Mazda B2300 B2500 B3000 B4000 Driver & Passenger Side 2 Piece Lighting Kit DEPO 1ALHT00491
$315.95
Replaces Ford Mazda Mercury Front Upper & Lower 4 Piece Control Arm with Ball Joint Set TRQ PSA65867
$309.95
Replaces Ford Ranger Mazda B2300 B3000 B4000 Front Semi-Metallic Brake Pad & Rotor Kit with Calipers TRQ BKA25336
$274.95
Part Details
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Butyl benzyl phthalate (BBP)d, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality auto replacement parts and the bets service on the internet. Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing and maintaining your vehicle. I'm going to use my 20 plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly, that's going to save you time and money. Thank you and enjoy the video.
In this video, we'll be showing you how to replace the tailgate handle on this '04 Ford Ranger, just the same as any '98 on up Ranger and also Mazda. You'll need T27 Torx bit and driver, a 10 mm socket and ratchet, some penetrating oil and some grease. Okay, to replace the tailgate handle on one of these Ford Rangers, it's pretty easy. What you have here, some T27 bolts holding this line on. There's one, two, three, four, five, six, seven, eight of them so I'm going to remove all eight of those. Okay, now this comes up. Put it up there for right now. Okay. One of the access panel here. Looking down there at the back side, you can see two 10 mm bolts right here. I'm going to remove those. While I'm doing this, just a note, usually what happens is this mechanism gets frozen up and the plastic tailgate handle breaks. What you want to do is when you're replacing this, take some time and use some penetrating, get this mechanism working really well and put some grease on it to make sure it stays working well.
You can see the handle as it pulls right now. There's you handle out. You can see these levers are just plastic. Like I said, this gets frozen up and those break off. It's all going to be the same. Okay, it's got a bolt in there just like the original. Okay, I'm going to actually bolt this one back in because it is in okay shape. As I said before, spray this down really well. I'm also going to spray the latches on both sides. This is white grease. Okay, spray everything really good. It's all working right and easy and smooth now. You just basically feed your handle right up and in. The studs will come through- where are you guys? There they are. Replace the mechanism down in with the two 10 mm bolts. Just put it right on there. Just a quick test. It works nicely. You put this panel down. Make sure it's lined up pretty good. Okay, I'll put all these eight Torx screws. We're all set.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality auto replacement parts and the bets service on the internet. Please feel free to call us toll-free, 888-844-3393. We're the company that serve you on the internet and in person.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to be working with our 2001 Ford Ranger. We're going to show you how to remove and replace your tailgate handle. Sometimes these break and the tailgate gets stuck open here. Ours is fine, but we're going to show you how to get inside and open the tailgate with a broken latch with it in the up position like this to make it easier to work on.
If you like this video please click subscribe. We have a ton more information on this truck as well as many other makes and models. If you need this part for your vehicle follow the link in the description over to 1AAuto.com. Here are the items you'll need for this repair.
Our truck has a bed liner, if yours doesn't you can skip this step but we'll have to push up on the top lip here. Slide our cover back. I'm going to take a flat blade screwdriver and just kind of wedge it in there to keep it back and give me a little more room to work. Then we're going to take a T30 Torx bit and a ratchet and remove these eight T30 Torx bolts here on the inside cover.
The other reason I have this screwdriver here is to keep this plate up. If you don't have this cover or you don't have the screwdriver wedged the way we do here, you're going to have to support this when you take the last bolt out. We'll remove our screwdriver and the back cover.
Here you can see our latch rods. Sometimes this door handle breaks and it doesn't actuate these rods properly. These plastic clips can break or they just come out of adjustment with old age. They can stretch out or this plastic can wear out and allow them to slide and not unlock both sides evenly. If any of these components are broken you can simply grab both latch rods and pull them to the middle and lower your tailgate.
Again, if you don't have this plastic cover, you don't have to worry about it but since we do, you simply push back and remove it once the tailgate is in the down position. Remove these two 10 millimeter bolts with a socket and ratchet. When removing the second one, be sure to support the latch from the bottom. Now rotate the latch and remove it from the vehicle.
Reinstall the handle. You may have to squeeze the mechanism together here to make sure that the mechanism lands under the arms of the tailgate handle. Line up the bolts, and reinstall your two 10 millimeter nuts.
Reinstall the cover and all eight of your T30 screws. Tighten these down with the T-30 Torx socket and a ratchet. If you have the plastic tailgate cover, insert the bottom first. Make sure that it hooks over the bottom of the gate. Line it up to the center. Push the top over. Close your tailgate and ensure that everything still functions properly. You're good to go.
Thanks for tuning in. We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
