Replaces
Part Details
Specifications
Returns: Parts with electrical components cannot be returned once installed.
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
VTA93523
Yes
this valve controls the cam timing via oil to and from cam phasers on the ford 5.4l triton. I have had zero trouble with these. only drawback when compared to oem is that the screw is not included. reuse old screw and squeeze tab a bit to hold screw captive.
Hello, Yes this comes exactly as pictured.
Gasket(s) are not required; " O " - rings are what's used for this application. Make certain they're present, put a bit of oil ( any type ) on them, then install The critical point is to ensure the correct connector goes to it as the two connectors are similar and can be installed incorrectly.
IAMTOPWRENCH1
Took vehicle to a know shop in town and told me they were not good quality and werent detecting oil pressure. Ended up buying a pair of new ones from other store and installed them
Updated? I think so, but more important, you have to transfer the screw to the new part. Please be careful....if you loose that screw inside the valve cover, you'll be pulling the valve cover off. I would mark the screw with some marking paint so you can see it incase it falls in the valve cover. Better buy an extendable magnet so you can fish is out....just as a precaution.
Yes
Yes this will work for the 5.4L models listed to fit.
Yes they do ! Be careful not to drop them down into the engine ! They aren't locked into the solenoid hold bracket like the originals !
These are not listed to fit any 2004 models with the 4.6L engine
