Replaces
Frequently bought together
Part Details
Specifications
Returns: Parts with electrical components cannot be returned once installed.
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace a switch pack on this 2012 Chevy Traverse. The only tools you're going to need include a flat blade screwdriver and a 90 degree pick.
Using your 90 degree pick tool, stick it into the slot underneath the panel in your pull handle and it'll pull right out. Then, using a flat blade screwdriver, push up on the tab on your switch panel and pry the switch panel up.
Using a flat blade screwdriver, pry up the white clip on this harness, push the tab, and pull the harness free. Push the tab on the next two harnesses and pull them free. Using a flat blade screwdriver, pry out the tabs on either side of the switch pack, and pull the switch pack out.
Take your new switch pack, push it into place, and then reconnect your harnesses. Replace that white clip on the last harness. Then push your switch panel back down into place and replace your panel behind the door pole handle.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
SWA41626
