Replaces
Frequently bought together
1 Year Warranty
This item is backed by our 1-year warranty. In the event this item should fail during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace a cabin air filter on this 2002 Chevy Suburban. The items you'll need for this includes a new cabin air filter from 1AAuto.com, a 7mm socket, a ratchet, a 7/32 inch socket, and a flat blade screwdriver.
You want to start off by removing this panel below your club box, and its held in with these three 7mm bolts right there. We'll just fast-forward as Don removes those. And you really only have to remove the two on the outside. The one towards the center of the vehicle you can just loosen.
Now, once that panel's pulled down, you can see this bolt right here for your cabin air filters. And this is a 7/32 inch. You can just go ahead and remove that. Push in the tab on this bracket and pull it down. Now you can pull your air filters down and out. Just pull this one forward, down, and out.
On the left are the old cabin air filters; on the right are the new ones from 1A Auto. You can see they're identical, and they're going to fit exactly the same. Feed your new cabin air filters back up into place. We didn't show here, but we vacuumed out that are a little bit before we put the filters back up in.
Now push this tab back up into place, re-clip the other side, and replace that 7/32 inch bolt. After you put the filters back up, then you can vacuum off the panel before you put it back up. Now push this panel back up into place. Then replace those three 7mm bolts. Just tighten them up, and we'll fast-forward as Don does this. Once you've done that, you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
