WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Power Window Switch 1997-2005 Buick Century
Created on:
Tools used
Flat Blade Screwdriver
1. Remove the power window switch panel
Pry up the power window switch with your flat blade screwdriver.
Disconnect the wiring harnesses.
2. Remove and replace the power window switch
Pry out the switches from the bezel.
Clip in the new ones and plug in the wiring harness.
Give the windows and locks a quick test.
Clip the whole panel in and once.
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet. Hi, I'm Mike Green. I'm one of the owners of 1AAuto. I want to help you save time and money repairing and maintaining your vehicle. I'm going to use my 20-plus years' experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com.
The right parts installed correctly, that's going to save you time and money. Thank you and enjoy the video. In this video, we'll be showing you how to replace the driver-side power window switch on this Buick Century. All you need is a screwdriver to do this. This switch is pretty easy. Pry up on the front here and it pulls out and up. Then, these harnesses come out of this. I'm getting the switch out of the bezel. I just pry in the middle to get one side going and over right there. There's the switch out. 1AAuto, our switch is going to install and plug in just like the original to reinstall it. Push it back up into the bezel. Plug in your harnesses again. Fit them down into the panel. Put the back in first and just the front down and you're all set.
We hope this helps you out. Brought to you www.1AAuto.com, your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free 888-844-3393. We're the company that's here for you on the internet and in person.
SWA41544
In Stock
Product Reviews
Loading reviews
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Buick is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Buick or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.