2012 Ford F450 Truck Upgrade Fog Light Kit DIY Solutions LHT01094

Hi, I'm Mike from 1A Auto. We've been selling auto parts for over 30 years. We're dedicated to delivering quality auto parts, expert customer service, fast and free shipping, all backed by our 100% satisfaction guarantee. Visit us at 1AAuto.com, your trusted source for quality auto parts.

In this video, we're going to be working with our 2013 Ford F250 Super Duty. We're going to show you how to remove and replace your vehicle's fog lights in the bumper. If you like this video, please click subscribe. We have a ton more information on this and many other vehicles, and if you need this part for your truck follow the link down in the description over to 1AAuto.com. Here are the items you'll need for this repair.

In order to remove the fog light assembly we'll need to remove this bracket here. There are two 13 millimeter bolts on the inside corner of the bumper here and two 13 millimeters here facing forward toward the back side of the bumper. We'll remove all four of those with the 13 millimeter socket and ratchet. Once the bolts are out, remove the bracket from behind the fog light.

Remove the three 8 millimeter bolts securing the fog light bracket as well as the fog light and bezel to the bumper. We'll do this using an eight millimeter socket and ratchet. Before removing the last bolt, remember to slide off the connector from your fog light bulb. Once all the bolts are out, maneuver your fog light bracket and bezel out of the truck.

Remove the four 13 millimeter nuts securing the fog light bezel onto the fog light bracket. Once the bolts are out, remove the bezel from the housing.

Here we have our old fog light and bracket assembly that we removed from our truck and our new part from 1AAuto.com. As you can see, these parts are exactly the same. We have the same three bolt mounting locations, there's the one on the back there. The same four holes for our fog light bezel to mount onto our new bracket.

We have our new light, which comes with a new bulb and has the same adjuster screw on the back. This one actually gives you the option of using either an eight millimeter or a Phillips, which makes it a little more convenient. You can see that the old lens is starting to get dirty and beat up from road debris and things hitting it and our new one is nice and clear, so not only is this going to make our truck look a lot nicer aesthetically but it's also going to brighten up these fog lights and get our truck a lot more visibility, make it safer, fix you up right.

Install the fog light bezel back onto the bracket assembly. Flip it over, reinstall and tighten the four 13 millimeter nuts.

Reinstall the fog light assembly. Make sure all your bolts and brackets line up. Reinstall the three eight millimeter bolts. Reconnect the electrical connector and the harness retainer pin. Reinstall the stiffener bracket and all four 13 millimeter bolts. Now it's easiest, you can see where the old bolts lined up on the inside edge of the bumper there so we'll tighten those down first and line them up to their old marks. That will suck this side into place so we don't have to look awkwardly or get in a weird spot to line those up.

Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.