2001 Ford Ranger Driver & Passenger Side 2 Piece Fog Light Set TRQ LTA49142

Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years! We're dedicated to delivering quality auto parts, expert customer service, and fast and free shipping, all backed by our 100% satisfaction guarantee. We've created thousands of videos to help you install our parts with confidence. That saves you time and money, so visit us at 1AAuto.com, your trusted source for quality auto parts.

In this video, we're going to be working with our 2001 Ford Ranger. We're going to show you how to remove and replace the OEM fog lights in your lower bumper valance.

If you like this video, please click subscribe. We have a ton more information on this truck, as well as many other makes and models. If you need this part for your vehicle, you can follow the link down in the description over to 1AAuto.com.

Here are the items you'll need for this repair: 8mm socket, ratchet, socket extension

On the backside of the fog light, inside of the lower bumper valance, disconnect the electrical connector for the light. Remove the three 8mm screws around the housing. For this, we'll use an 8mm socket and ratchet. Be sure to keep one hand on the back of the fog light when removing the last bolt, then remove the fog light from the valance.

Here we have our old fog light that we removed from our vehicle, and our new part from 1AAuto.com. As you can see, these parts are identical, with the same bracket, we have the same light. This one's nice and fresh, while this one has a lot of debris and moisture damage on the inside of the lens.

The same mounting location is on the backside. This new one actually comes with a nice breather tube here to allow moisture out of the housing and prevent it from building up. We have an adjustment screw on the bottom so you can align them if necessary. It even comes with a nice, new bulb in there too, so if your fog lights have moisture build up or become cracked, broken, or just aren't producing the light output they should, this new part from 1A Auto is going to go in direct fit just like your original equipment.

Install your new fog light assembly into the valance. Start your three 8mm screws by hand. Once you've got the screws started, tighten them down with an 8mm socket and ratchet. Reinstall the electrical connector, and repeat these steps on the opposite side.

Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.