Direct Fit - No vehicle or wiring modification necessary
DOT, SAE, and FMVSS Compliant - Meets on-road use regulations
Matching set for a restored look
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
How to Replace Tail Lights 1997-2004 Dodge Dakota
Created on:
Tools used
T20 Driver
1. Remove the tail light
Lower the tailgate.
Remove the two T20 Torx screws on the side of the tail light assembly.
Pull the light out, twist out the bulbs and unplug the wiring harness.
2. Install the new tail light
Transfer the wiring to the new tail light.
Twist in the bulbs.
Plug in the wiring harness and put the tail light into place.
Anchor with the two T20 Torx screws.
Close the tailgate.
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet. Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing and maintaining your vehicle. I'm going to use my 20+ years' experience restoring and repairing cars and trucks like this to show the correct way to install parts from 1AAuto.com. The right parts installed correctly. That's going to save you time and money. Thank you and enjoy the video.
The only tool you'll need is a T20 size Torx driver.
OK, so tail light replacement on a Dodge Dakota. There's two T20 torque screws right here. Once those screws are out, then you just kind of pull a little bit back on the tail light and it comes out. You're just looking to service the bulbs. You can see them right there. Now that just twists off and comes out. Maybe your tail light got wiped out by a poorly-placed 2x4 or something like that.
You can see the white - this is a new light from 1A Auto; it's just a little brighter. Everything about our light is the exact same as the original. They go in individually and slot into their posts. You can see it fits in just like the original. These guys twist in and lock, just like the original ones did. The light goes in, clips into place and then the seam screws. Then your lights in. So, you can see the new light from 1A Auto fits on just like the original and then you'll be all set to go.
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet. Feel free to call us toll free, 888-844-3393, the company that's here for you on the internet and in person. Thank you.
LTA49158
In Stock
Product Reviews
Loading reviews
There are no reviews for this item.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Dodge is a registered trademark of FCA US LLC. 1A Auto is not affiliated with or sponsored by Dodge or FCA US LLC.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.