Replaces
Frequently bought together
Returns: Parts with electrical components cannot be returned once installed.
Left Hand Drive:
All of our auto parts are intended for Left Hand Drive USDM vehicles. If your vehicle is Right Hand Drive, please ensure the part is correct for your specific vehicle.
Attention California Customers:
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks!
In this video, we're going to replace the blower motor in this 2005 Volkswagen Jetta. The process is similar for this generation Jettas, as well as the Golf, and the Passat.
The blower motor is located behind the glove box. Go up underneath and there is a foam insulation or sound pad here. On this vehicle, you use a flat blade screwdriver and remove the two clips that hold it in place. Once the clips are removed, pull the pad down and out. The heater motor is up underneath. A little bit to the right, there's a tab that you pull down. I can probably pull it down with one hand, and then twist with the other. Pull down, twist, and then there's tabs that hold the motor in, so just twist right out. Then you want to pull on the air duct that has the holes in it, to the top of the screen, pull it back a little bit, and then pull the blower motor down. Then as it comes down a little bit it will probably get caught on the carpet a little bit, so reach up in there and pull it down the rest of the way.
Then your connection will vary depending on what options you have. This vehicle has automatic temperature control so there's two tabs on each side. Pry the tabs with the screwdriver and disconnect.
To reinstall, reconnect your new motor. Make sure it's secure, and then feed it up into place. You'll want to feed the cage up into the hole a little bit first, and then feed the side closer to the engine of the vehicle; feed that in first. You can feed it in actually a little too far at first, pull it back down, and then it goes up by that ducting. Then you need to line up tabs, and once you get it in twist it and lock it in place. Then reinstall the foam pad. Put it up into place. I usually put the side next to the glove box in first around those air duct holes. Then push the rest of it up and in around the edges. Then put the clips back in.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
HMA84794
It should fit a 2011. Many Jetta parts from 2006 - 2013 or 2014 are interchangable between years. The fan is doing great. Yes, I have manual temp controls on my 2010 Jetta.
No, the resistor is not included.
Auto if you set a specific temperature. Manual if you just set a level of hot and cold.
no it don't . it is below the glove box to the right easy install
