★★★★★
September 1, 2024
2015 RAV4 XLE
So far so good. Seems to be an exact replacement easy change out.
Replaces
About TRQ:
TRQ is a trusted brand dedicated to making every repair a success story by combining premium parts with easy installation. Each TRQ part is engineered by a team of automotive experts to meet or exceed OEM standards, delivering enhanced performance and maximum longevity. With rigorous in-house testing, the brand ensures superior fit and function across every product line. TRQ also provides customers with best-in-class, step-by-step installation videos—so you can complete repairs with confidence, whether you're a first-time DIYer or an industry professional.
Product Features
TRQ variable valve timing (VVT) solenoids are manufactured to precise specification using premium raw materials with anodized housings for maximum service life. To ensure peak performance, TRQ recommends replacing the variable valve timing solenoids in pairs (where applicable) to ensure a consistent oil flow rate and prevent premature wear of timing components. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Returns: Parts with electrical components cannot be returned once installed.
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
This part fits 19 vehicles spanning 2008-2016.
| Year | Make | Model | Description |
|---|---|---|---|
| 2011-2013 | Lexus | CT200h | Lexus CT200h Intake Variable Valve Timing Solenoid TRQ VTA93431 |
| 2013-2016 | Lexus | ES300h | Lexus ES300h Intake Variable Valve Timing Solenoid TRQ VTA93431 |
| 2009-2010 | Pontiac | Vibe | Pontiac Vibe L4 1.8L Intake Variable Valve Timing Solenoid TRQ VTA93431 |
| 2011-2016 | Scion | tC | Scion tC Intake Variable Valve Timing Solenoid TRQ VTA93431 |
| 2008-2013 | Scion | xD | Scion xD Intake Variable Valve Timing Solenoid TRQ VTA93431 |
| 2013-2016 | Toyota | Avalon | Toyota Avalon L4 2.5L Intake Variable Valve Timing Solenoid TRQ VTA93431 |
| 2009 | Toyota | Camry | Toyota Camry L4 2.4L Intake Variable Valve Timing Solenoid TRQ VTA93431 |
| 2010-2016 | Toyota | Camry | Toyota Camry L4 2.5L Intake Variable Valve Timing Solenoid TRQ VTA93431 |
| 2009-2010 | Toyota | Corolla | Toyota Corolla L4 1.8L Intake Variable Valve Timing Solenoid TRQ VTA93431 |
| 2011-2013 | Toyota | Corolla | Toyota Corolla Intake Variable Valve Timing Solenoid TRQ VTA93431 |
| 2009-2016 | Toyota | Highlander | Toyota Highlander L4 2.7L Intake Variable Valve Timing Solenoid TRQ VTA93431 |
| 2009-2013 | Toyota | Matrix | Toyota Matrix L4 1.8L Intake Variable Valve Timing Solenoid TRQ VTA93431 |
| 2010-2016 | Toyota | Prius | Toyota Prius Intake Variable Valve Timing Solenoid TRQ VTA93431 |
| 2012-2016 | Toyota | Prius V | Toyota Prius V Intake Variable Valve Timing Solenoid TRQ VTA93431 |
| 2009-2014 | Toyota | Rav4 | Toyota Rav4 L4 2.5L Intake Variable Valve Timing Solenoid TRQ VTA93431 |
| 2015-2016 | Toyota | Rav4 | Toyota Rav4 Intake Variable Valve Timing Solenoid TRQ VTA93431 |
| 2011-2012 | Toyota | Sienna | Toyota Sienna L4 2.7L Intake Variable Valve Timing Solenoid TRQ VTA93431 |
| 2011-2014 | Toyota | Tundra | Toyota Tundra V6 4.0L Intake Variable Valve Timing Solenoid TRQ VTA93431 |
| 2009-2015 | Toyota | Venza | Toyota Venza L4 2.7L Intake Variable Valve Timing Solenoid TRQ VTA93431 |
| Brand Label | Part Number |
|---|---|
| DIY Solutions | ESS00722 |
| Toyota | 153300T010 |
| Wells | TS1073 |
| Toyota | 15330-37010 |
| Dorman - OE Solutions | 917-235 |
This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
Remove the plastic cover. We have removed our cowl panel here, so you can see what we're doing better, but you can snake out this variable valve timing solenoid with the cowl piece installed, however, this gives us little better access and it's easier for you to see in a video what we're doing.
To remove this connector, we'll spray a little bit of water displacement oil in here to help free it up. It's got some dirt in it. Lock's on this side. We'll push it in. It's because you push the hole connector in this way, it'll open the lock. And then pull it off. Makes it easy to work it back and forth a couple of times. Try not to pull on the wires. If need be, use a little small flat bladed screwdriver to help you push the lock open. And there it is. Spray some rust suspension here. Use a 10 millimeter socket and ratchet to remove the 10 millimeter bold that's holding it into the head. Put the bolt and washer aside once I take it out.
With the bolt removed, you can kind of spin it this way. Then, it's sitting on an o-ring. Just have to work it out, back and forth and it should come out.
This is the original variable valve timing solenoid we pulled from our vehicle. Our brand new one from 1AAuto.com, same exact style design, same style connector, same mounting hole. This will work great and fit great for you.
Install the new one. Slide it into the same opening. The o-ring will fit pretty tightly. Slide it down. Get the bolt started by hand. It's a steel bolt going into the aluminum valve cover. You don't want to cross-thread it. I need to adjust the position of it. Tighten it up. You don't want to over tighten it. When it feels tight, just stop. Put the oil connector back in. It's keyed. It can only go in one way. It will click when it locks in place.
Put your plastic engine cover back on. These three rubber mounts, just push over these three ball sites, line it up with the oil cap hole. And that's it.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Tools used
What's up, guys? I'm Andy from 1A Auto. In this video, I'm going to show you how to replace the intake VVT solenoid on this 2010 Toyota RAV4. If you need this part or other parts for your vehicle, click the link in the description and head over to 1aauto.com.
Just want to pull this cover off. Just grab underneath the cover, slide up, and up there and there is these retainers that hold it in and just push on little grommets right on those locations. Your intake VVT solenoid is on the back side here. It's similar to the exhaust solenoid. Just disconnect the connector right here. Push down on that and release that connector. Then, there's a bolt right here. We're going to take that bolt out first. I'm going to use a 10mm socket and an electric ratchet. You can use a regular ratchet if you don't have an electric one. Take that out. We can grab the solenoid, try to wiggle it back and forth a little bit. There's an O-ring that if there's any dirt or corrosion above the O-ring, it's a little bit tricky to remove the solenoid. Actually, so I can see it more, not that you have to do this, I am going to take these two nuts off right here just so I can move that wiring harness out of the way. Use the same 10mm socket and ratchet.
Slide this up. I'll just move that out of the way a little bit just so I can see, but you don't have to do this. This is just for the video. I am going to use a little water displacement oil. Just spray that down, let it soak a little bit, or some kind of lubricant. I'm going to take a straight blade screwdriver and just try to get in here a little bit. Just be careful, you don't want to mess up any of the machine surfaces. Be careful prying right here. You don't want to bend it if you're going to reuse it. Just work it back and forth. Just be careful doing this. Slide it up and there you go.
Now, take the VVT solenoid. I'm just going to take a little bit of transmission fluid, you can use engine oil or some other type of lubricant and just lubricate this before you slide it in and it'll just make easier installation. It's also a good idea if you're having problems with this and the solenoid had failed that after you do this job, you actually change the oil because the oil could be the cause of the solenoid failure. Just slide this in here. Just line it up. Don't force it. You want to get everything lined up because you don't want to mess up any of the machine surfaces. I'm going to slide that in just like that. I'll take the bolt, get the bolt lined up. Now, I'll just take a 10mm socket and ratchet and just snug this bolt down. Not too tight. Take the connector and line it up, lock it in place, and you didn't have to take this wiring harness off, but if you did, then install the wiring harness and then these two nuts, install those and tighten them down.
Slide it down. Take this cover and we want to line these little tabs up with these little pins right there. There's three of them. Just push it down and then you're good to go.
Thanks for watching. Visit 1aauto.com for quality auto parts shipped to your door. The place for DIY auto repair, and if you enjoyed this video, please click the subscribe button.
So far so good. Seems to be an exact replacement easy change out.
Perfect fit and works like it should
This part seems fine and I installed it. My 2012 Prius 2 will not accelerate the engine or charge the hybrid battery, I have changed the fuel pump, fuel injectors, hybrid battery and 12 volt battery and charge controller, egr valve, MAP and MAF sensors, Intake manifold, throttle body and accelerator pedal, pcv valve, timing chain sensor and now the Valve timing solenoid. The car idles great and no check engine lights. Nothing has helped, next step is taking it to Toyota.
Good
Nice
Fixed code P0080 on my Prius. Thanks for the instruction video
Excellent business to deal with great prices and customer service.
This is unable to fit for any other side other than the intake.
Hello, I apologize we do not have that kind of information you can try searching on google.
There could be multiple reasons why you're having this particular problem. We suggest taking your vehicle to a nearby reputable shop to identify the cause. Once you know the cause, we'll be happy to see if we carry the parts and how-to videos needed for your repair.
Thank you for the inquiry. We would recommend having the vehicle diagnosed in order to determine which one you actually need. We are not able to give diagnoses.
Suggest u clean or replace screens if u have speed limit issue
