Can't beat price, quality fit, finish and warranty. Pressed in smoothly using 12 ton press.
Replaces
Currently, we do not carry this part for your vehicle. We're always updating our inventory so please check back soon!
Yes, this part will fit your vehicle.
Yeah, you have to press them in. Make sure you have a press that can properly push the bearings in without breaking them or ruining them. I used a 20-ton press and had the bearings frozen before putting them in.
Yes, this part will fit your 2010 Toyota Venza.
Yes, this part will fit your vehicle.
Yes, according to the information you provided, this part will fit your vehicle.
This product came as 1 hub, 1 bearing, one retainer clip and one axle bolt. You MUST replace your old axle bolt.
No. If this is the 2.4 L hub it will not fit a 3.5 L engine. The axle radius are different. You MUST get a hub that is for your 3.5 engine or the axle will not fit in the hub.
This part will not fit your vehicle. We may have a part that is listed to fit. Please enter your vehicle's year make and model in the search bar at the top of the page. This will display parts guaranteed to fit your vehicle. If you'd like to order with a Customer Service Representative, please give us a call at 1-888-844-3393. Thank you!
Sounds like you need an output shaft seal. Typically the bearings inside the transmission are not serviceable unless rebuilding the transmission.