Replaces
Replaces Toyota Avalon Camry Lexus ES300 Front & Rear 8 Piece Suspension Kit TRQ PSA56346
$419.95
Replaces Toyota Avalon Camry Lexus ES300 Front & Rear 4 Piece Strut & Spring Assembly Set TRQ SCA57070
$369.95
Replaces Toyota Lexus 6 Piece Ignition Coil Set Delphi DEERK00120
$354.95
Replaces Toyota Lexus Timing Belt and Component Kit with Water Pump and Seals DIY Solutions ETS00034
$334.95
Replaces Toyota Lexus Timing Belt Kit with Water Pump Gates TCK257
$324.95
Replaces Toyota Avalon Camry Lexus ES300 Rear Driver & Passenger Side 2 Piece Strut & Spring Assembly Set Monroe Quick-Strut MNSSP00029
$281.95
Replaces Toyota Camry Lexus ES300 Front Semi-Metallic Brake Pad & Rotor Kit with Calipers & Hoses TRQ BKA29831
$273.95
Replaces Toyota Camry Lexus ES300 Front Ceramic Brake Pad & Rotor Kit with Calipers & Hoses TRQ BKA29830
$273.95
Part Details
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Item Condition:
New
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet.
Hi, I'm Mike Green. I'm one of the owners of 1AAuto. I want to help you save time and money repairing and maintaining your vehicle. I'm going to use my 20-plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly; that's going to save you time and money. Thank you and enjoy the video.
In this video we're going to remove and reinstall an alternator in this '94 Camry, same as any '94 to'96 Camry and actually same as a few different vehicles that have the 3.0-liter VW6 such as Solara and Lexus ES300.
We're going to use the 10-millimeter wrench to disconnect the negative battery cable to loosen up this bolt here. You can also remove this 12-millimeter bolt. First we'll just loosen up this 14-millimeter bolt. Now you want to loosen this 13- millimeter bolt down here. Then as you loosen this 13-millimeter bolt, you'll see my belt start to loosen. Once you have it loosened up, pull the belt off the alternator.
You want to disconnect the leads on the alternator so you pull this rubber boot up and off. Then there's a tab right here that you need to push this way on to unlock it. You push on that tab and pull on the lead. Sorry if I'm in the way here. I wanted to show you that a little better. Here's the tab. Push down with your thumb to unlock it. Push right on the top of the tab right here. Then here's your battery lead, 10-millimeter wrench. Lift that up and off. I just put the nut right back on for safe keeping. Now with the belt out, you want to remove this bolt the rest of the way. Now you can remove this bolt the rest of the way. Now your alternator moves forward and up and out.
Here's our original new alternator from 1AAuto. You see it has the same connections and everything. It's all going to mount in the same. Actually there's nothing wrong with this alternator in this car. I'm just doing the video to show you, so I will reinstall the old one. I just wanted to show you that the new one from 1AAuto, if you need a new alternator, it's got to be the correct one. It's going to bolt in just the same as the original.
To reinstall, put it down in the same way. First we'll put in this bolt. When you put the bolt in here, you want to make sure that this block, the bolt, the tensioning bolt is closer to your alternator. Put the bolt through the block and make sure, like I said, this tension bolt is close to the alternator as opposed to you don't want to put it on you want it positioned you want the block positioned this way. You don't want it positioned this way. You want it positioned that way. Put our bolt in; put your alternator up.
You can kind of see through the slot in the bracket. Then get that bolt in and then you get it hand tight. Okay, put the alternator down. Hold your belt up and on. Now make sure it's on your AC. Make sure it's on your crank pulley. I'm going to speed this up a little bit. Now here I'm just tightening up that tension bolt. You want to have about a- you want to be able to press in the middle of the belt and about a quarter inch of play. That when you know it's tight enough. Now you can tighten up your 13-millimeter bolt here. Now you can tighten up your 14- millimeter bolt here and then lastly plug in your connection. Make sure it clicks. Put that boot back down over. 10 mm nut. Make sure it's nice and firm. It doesn't have to be extremely tight but it has to be good and firm on there. Push your boot back over it and now reconnect your negative battery cable, push it down on, take your 10-millimeter up here.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the internet and in person.
