★★★★★
January 15, 2026
Great fit
Replaces
About TRQ:
TRQ is a trusted brand dedicated to making every repair a success story by combining premium parts with easy installation. Each TRQ part is engineered by a team of automotive experts to meet or exceed OEM standards, delivering enhanced performance and maximum longevity. With rigorous in-house testing, the brand ensures superior fit and function across every product line. TRQ also provides customers with best-in-class, step-by-step installation videos—so you can complete repairs with confidence, whether you're a first-time DIYer or an industry professional.
Returns: Parts with electrical components cannot be returned once installed.
Left Hand Drive:
All of our auto parts are intended for Left Hand Drive USDM vehicles. If your vehicle is Right Hand Drive, please ensure the part is correct for your specific vehicle.
Attention California Customers:
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
This part fits 2 vehicles spanning 1997-2003.
| Year | Make | Model | Description |
|---|---|---|---|
| 1997-2001 | Toyota | Camry | Toyota Camry HVAC Blower Motor Assembly TRQ HMA84816 |
| 1999-2003 | Toyota | Solara | Toyota Solara HVAC Blower Motor Assembly TRQ HMA84816 |
| Brand Label | Part Number |
|---|---|
| Toyota | 87103-06021 |
| Toyota | 8710306021 |
| Partslink Numbering System | TO3126107 |
| Hollander | 615-58399 |
This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Hi. I'm Tony with 1A Auto here to talk to you today about the blower motor and fan assembly from this ‘98 Toyota Camry behind me. You can see we have our old part that we removed from the vehicle and our new replacement piece from 1AAuto.com.
As you can see, we have the exact same mounting locations on the bottom. The fans are a little bit different, but they're going to work the exact same way. We have the same two pin connector on the bottom. If you’re A/C or heat isn't blowing like it used to or you hear a rattling noise whenever you turn your fans on, this new part from 1A Auto is going to fix you up right.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the A/C and heater, lower motor. This is a 1998 Toyota Camry, which is the same for 1997 to 200. You'll need a new blower motor from 1AAuto.com and a flat blade or a T25 Torx driver.
Remove the lower plastic cover onto the passenger side of the dashboard by pulling straight down and toward you. Remove the electrical connector at the bottom of the blower motor. Remove the three screws, holding the blower motor into the HVAC housing. This can be done with a Torx bit, a 10 millimeter socket or a flat blade screwdriver which we'll use. Remove the blower motor from the bottom of the HVAC housing.
Here we have our old part that we removed from the vehicle and our new part from 1A Auto. As you can see, there are some slight aesthetic differences in the actual fan, but it's still going to function properly.
We have the same mounting locations, the same 2-pin connector, and the same outer diameter to fit into our HVAC box so if your heat and A/C isn't blowing like it used to, or you hear a noise when you run your fans. This new part from 1A Auto is going to fix you up right.
Reinstall the blower motor into the HVAC box. Reinstall your three screws and either a Torx bit, a 10 millimeter, or a flat blade screwdriver.
To show you that this hardwood can be installed with three different tools, we're going to use a T25 Torx screwdriver to reinstall the hardware. Reinstall the electrical connector.
Install the rear pin into the hole by the firewall and snap the front clips into place.
Thanks for tuning in. We hope this video helped you out. Next time you need parts for your car, please visit 1AAuto.com. Also check out our other helpful how-to and diagnosis videos.
Tools used
Hi. I'm Tony with 1A Auto here to talk to you today about the blower motor and fan assembly from this ‘98 Toyota Camry behind me. You can see we have our old part that we removed from the vehicle and our new replacement piece from 1AAuto.com.
As you can see, we have the exact same mounting locations on the bottom. The fans are a little bit different, but they're going to work the exact same way. We have the same two pin connector on the bottom. If you’re A/C or heat isn't blowing like it used to or you hear a rattling noise whenever you turn your fans on, this new part from 1A Auto is going to fix you up right.
Great fit
After replacing my blower once with another manufacture, I wasn't happy with the results. (Low wind) So I purchase this one TRQ HMA84816 from 1A. Very happy with the blower fan and highly recommend it.
The HMA84861 motor blower assembly fit my 1998 Camry perfect and now get much more heat & ac coming into car Thanks 1A AUTO Will order again if need anything.Fast shipping and very helpful.
Works great and was easy to replace! 3 screws and one plug. Basically plug and play! The new motor is quiet and has amazing air flow.
It works good but if your vin # has a J in it the blower motor is hard wired in and does not have the easy unplug and plug the new one in .
It works perfectly. The video that shows how to replace is a bit misleading. I had to remove glovebox and some items attached to the blower in order to replace it on my 1997 Camry
Not sure it works yet need blower resistor but it took forever to get here
Works great.
Works great
Great product and so far works like a charm. I will admit and point out (as other people have) that I did need to alter the plug in area a bit to get it to fit but after shaving away some of the plastic it fit securely in place.
HMA84816
Written and video installation instructions are found on the product page under the "How-To & Tools" tab. We're constantly adding new installation video instructions. If we do not have one for your vehicle on the product listing page, please check again at a later time or check our Video Library to see similar repairs here: <a href="https://www.1aauto.com/videos" target="_blank">https://www.1aauto.com/videos</a>
