Replaces
Part Details
Specifications
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Tools used
BHA65734
No they are not pressed. I had trouble finding a shop to press them. They say nowadays they don’t want to do it due to liability concerns. They have to press and install them. I bought $100 hydraulic press at Harbor Frieght and did the job myself. It’s been about 20k miles and been holding up great. I’d order a spare set of just the bearings. I learned that the hard way when I broke one of mine during the install.
The magnetic side will go towards the ABS sensor.
