Subaru Rear Driver & Passenger Side 2 Piece Wheel Bearing & Hub Assembly Set TRQ BHA65657

Fit well, easy enough to replace with a slide hammer and help with the grinding noise I was hearing from the old bearing assembly.

Worked just fine

Direct fit easy to install part.

I have always had success with 1AAuto, quality parts shipped and delivered quickly along with good tracking.

I hired a local freelance to mechanic to install these on my Outback because I had heard the old bearing assemblies could be problematic to remove. This was the case with mine. He eventually got the old off and installed the new. It turned out that one of the new assemblies was defective because the "magnetic strip" was in the wrong place due to a manufacturing defect. He talked to 1A and they shipped him a new assembly right away, I sent back the defective part a few weeks later with a shipping label from 1A. The new assemblies are really quiet. I actually didn't realize how loud the original parts had become until I had these installed.

Works just fine

Well done from start to finish? shopping, receiving in a timely fashion to install. Working well thus far. Appear well built.

The rear wheel bearing was a direct replacement. Removing the original bearing with 175,000 miles on the car and living in the salt belt was the difficult part. I installed the three mounting bolts in most of the way, then used an air hammer with a blunt bit on the heads of the mounting bolts to push the bearing from behind. I didn't deform the bolt heads too bad, and was able to clean them back up with a file. No idea how to remove those bearings any other way. Tapping with a hammer as the video showed did not work for me.

I love it

2019 Subaru WRX fits well good price