Replaces
Yes, the parts will come as pictured. We have it advertised as 8 as the hub nuts are smaller parts.
Yes, these will support your vehicle with ABS.
You do have to press out the bearing. With the right tools you can leave the hub on the car. I used a kit I found on Amazon and some other tools I got on loan from Auto Zone. It’s really not a bad job, if you’re properly prepared. There are good videos on YouTube. I still have the kit from Amazon. If you’d like, you can shoot me a text and I’ll give you a good deal on it. Eightoh3 2threezero 49forethree
This will fit a 5x100 bolt pattern look up what yours is. Not sure what bolt pattern foresters are if it’s not the turbo model it’ll probably fit I have a sti and a Impreza, the 07 Impreza is 5x100 07 sti is 5x114.
This fit my 2003 Baja. The area where it fits into the knuckle is straight and the area that fits onto the shaft is straight. Both had to be press fit on. The bearing splits in half and the bearing races are tapered. Hope this helps.
Yes, this part will fit your vehicle.
Yes, according to the information you provided, this part will fit your vehicle. Please let us know if you have any other questions!
If you have the 1ASHS01025 kit, it should have both seals. They look very similar but have slight differences. The plastic bags labeled:
1AAXX00084 will be the OUTER seal (the side that is toward the wheel hub, see Subaru Part# 28015AA0708A for reference).
1AAXX00083 is the INNER seal (the side that is towards the axle, see Subaru part# 28015AA080 for reference).
I hope this helps.
Yes, the plastic should be removed before installation.
Thank you for your inquiry! Yes, these are sealed bearings.