★★★★★
June 20, 2024
Delivery time was fast and the parts were fine.
Replaces
About TRQ:
TRQ is a trusted brand dedicated to making every repair a success story by combining premium parts with easy installation. Each TRQ part is engineered by a team of automotive experts to meet or exceed OEM standards, delivering enhanced performance and maximum longevity. With rigorous in-house testing, the brand ensures superior fit and function across every product line. TRQ also provides customers with best-in-class, step-by-step installation videos—so you can complete repairs with confidence, whether you're a first-time DIYer or an industry professional.
Our control arms are designed to be direct replacements for the original factory parts. They are 100% brand new and require no modifications for installation. No special tools are required because all of the bushings come pre-installed.
Our steering and suspension components are pre-greased and sealed for long life and do not require the extra maintenance typically required by greaseable versions.
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
This part fits 2 vehicles spanning 2009-2014.
| Year | Make | Model | Description |
|---|---|---|---|
| 2009-2013 | Subaru | Forester | Subaru Forester Front Driver & Passenger Side Lower 2 Piece Control Arm with Ball Joint Set TRQ PSA66800 |
| 2011-2014 | Subaru | Impreza | Subaru Impreza WRX Front Driver & Passenger Side Lower 2 Piece Control Arm with Ball Joint Set TRQ PSA66800 |
| Brand Label | Part Number |
|---|---|
| DIY Solutions | SUS04559 |
| DIY Solutions | SUS06139 |
| DIY Solutions | SUS06140 |
| Hollander | 512-50399R |
| Hollander | 512-50400L |
| Mevotech | CMS801052 |
| Mevotech | CMS801051 |
| Subaru | 20202SC010 |
| Subaru | 20202SC002 |
| Subaru | 20202SC012 |
| Subaru | 20202SC011 |
| Subaru | 20202SC013 |
| Subaru | 20202SC000 |
| MOOG Chassis Products | RK622787 |
| MOOG Chassis Products | RK622789 |
| Dorman - OE Solutions | 524-784 |
| Dorman - OE Solutions | 524-783 |
| Mevotech Supreme | CMS801051 |
| Mevotech Supreme | CMS801052 |
| Subaru | 20202SC001 |
This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Delivery time was fast and the parts were fine.
Quedan perfectos
If you know what a pain it is to get the ball joints out of these subarus, you'll only want to do this job once. Bushings shot again after only 2 years.
Arrived sooner than expected! Good fit and improved ride on high milage forester!
Great fit!
They fit my 2009 forester. Now got the alignment done and car feels much more sturdy when driving.
The control arms work perfectly well, but had one major issue. One of the ball joints was about .010" to large in diameter. That might not seem like much, but it was the difference between it sliding nicely into the knuckle, and me hammering away at it for an hour. The "spec" I'm referring to is comparing the measured outer diameter it to the other new one I received and also the old ones I was replacing. Once I realized the difference in size, I had to take a sander on a Dremmel to file it down to size. It was pretty obvious comparing it that a finish machining step had been skipped (the others had a machined surface, the bad one did not). Once I fixed it, the install was fine. But really disappointed to have a part get through QC that wasn't fully machined.
Installed, torqued, tested, and holding up! What more can be said!?! Thank you 1A Auto for the training videos as well to make this happen!
Seem to be good quality. One of the balljoints didn't have the cotter pin installed, it was in the bag but not in the balljoint which was weird. Would have been nice if these came with new balljoint bolts, I had to track down a set from the dealership.
One of the ball joints was not properly installed. The cotter pin was missing and the castle nut was loose. When I heard a banging noise on test drive, I found the problem and remedied. Could have been a lot worse had I not found the problem before letting my daughter drive off.
PSA66800
They're rubber
Yes, the ball joint will be installed on the control arm.
They're made out of steel.
