★★★★★
January 17, 2025
Inner tie rod was fine; however the outer tie rod came with a nylon locking nut. Was expecting a tie rod end with a cotter pin type locker.
Replaces
About TRQ:
TRQ is a trusted brand dedicated to making every repair a success story by combining premium parts with easy installation. Each TRQ part is engineered by a team of automotive experts to meet or exceed OEM standards, delivering enhanced performance and maximum longevity. With rigorous in-house testing, the brand ensures superior fit and function across every product line. TRQ also provides customers with best-in-class, step-by-step installation videos—so you can complete repairs with confidence, whether you're a first-time DIYer or an industry professional.
Install Tip: When replacing steering components, have a professional alignment performed afterwards. This ensures proper tracking and even tire wear.
Our steering and suspension components are pre-greased and sealed for long life and do not require the extra maintenance typically required by greaseable versions.
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
This part fits 5 vehicles spanning 1993-2006.
| Year | Make | Model | Description |
|---|---|---|---|
| 2003-2006 | Subaru | Baja | Subaru Baja Front Inner & Outer 4 Piece Tie Rod Set TRQ PSA55111 |
| 1993-1995 | Subaru | Impreza | Subaru Impreza All Wheel Drive Front Inner & Outer 4 Piece Tie Rod Set TRQ PSA55111 |
| 1996-1997 | Subaru | Impreza | Subaru Impreza Front Inner & Outer 4 Piece Tie Rod Set TRQ PSA55111 |
| 1993-2004 | Subaru | Legacy | Subaru Legacy Front Inner & Outer 4 Piece Tie Rod Set TRQ PSA55111 |
| 2000-2004 | Subaru | Outback | Subaru Outback Front Inner & Outer 4 Piece Tie Rod Set TRQ PSA55111 |
| Brand Label | Part Number |
|---|---|
| MOOG Chassis Products | ES3712 |
| MOOG Chassis Products | EV257 |
| DIY Solutions | SUS02083 |
| DIY Solutions | SUS07625 |
| DIY Solutions | SUS07400 |
| Subaru | 34141AC0109E |
| MOOG Chassis Products | ES3692 |
| MOOG Chassis Products | EV473 |
| Mevotech | MES3712 |
| Mevotech | MEV257 |
| Subaru | 34140AA010 |
| Subaru | 34140AC000 |
| Subaru | 34140AA030 |
| Subaru | 34140AA001 |
| Subaru | 34140AA040 |
| Subaru | 34141AA013 |
| Subaru | 34140AA013 |
| Subaru | 34140AA011 |
| Subaru | 34140AA003 |
| Mevotech Supreme | MES3712 |
| Dorman - Premium | TO72025XL |
| Delphi | TA1812 |
| Beck/Arnley | 101-4585 |
| Mevotech Supreme | MEV257 |
This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Inner tie rod was fine; however the outer tie rod came with a nylon locking nut. Was expecting a tie rod end with a cotter pin type locker.
Solid parts!
Appear to be stout replacement tie rods. Two minor disappointments with the install: 1. The inner portion has four flats instead of two like OEM, but the complaint is that the width across the flats is less than the rented tie rod tool set from the auto parts store. So couldn't get a full torque on them, hoping they got enough. 2. The washer has the flaps to fit into the end of the rack but there are no indentions on the inner to stake the washer to help prevent it backing off. So it's just flat on flat.
PSA55111
