Replaces
1 Year Warranty
This item is backed by our 1-year warranty. In the event this item should fail during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet. In this video, we're going to show you a serpentine belt replacement on this '98 Chevy Venture same as any '97, '98, also '96 to '98 Montana with a 3.4 liter and it fits other GM vehicles with 3.1 and 3.4 liter V6s.
You can see we're looking down at the top of our engine. A couple, or one big thing is you want to always find your drive belt routing diagram here first and just kind of get a feeling how this translate to what we're looking at as far as the belt goes. Here, we're looking at this part of the belt when we're looking right here. That means that there's more belt that runs down underneath here. As far as getting the belt off, it's pretty simple actually. You can see further down, I don't know if I can point to it without getting in the way here. This is your belt tensioner. The belt tensioner has a square hole in it which is the size of a 3/8 ratchet drive so you want to put the 3/8 drive handle in there. Then you want to push on the handle and then grab your belt and take it off of that pulley there. Then you can let your tensioner back. Now you can just basically grab your belt and take it off the alternator which is back in there. Basically kind of flip it off of all your different components here. There's an idler. There's an idler down there and then way down there's an A/C pulley and pull your belt right out.
Your new belt here, according to the routing diagram, what you want to do is probably fit it between your tensioner and your crank pulley first. Then get it down and around the A/C compressor. There's really no way I can film that. You'll have to take my word for it I guess. I'm kind of using my hand to flip it between, there's a tight space between the tensioner and the crank pulley. I've got it down and around the crank pulley now and I'm just using my hand and you're probably getting a good shot at the back of my neck there. You have to just feed it down get it around the A/C compressor pulley. At this point, I've basically got it around my tensioner, around my A/C compressor pulley and then what I need to do is take it and go back and around my alternator. Then you can see, it's basically routed, but it's just kind of sitting here waiting to get onto this pulley. I'll take my 3/8 ratchet again and push my tensioner back, and then with this hand grab the belt put it on there and make sure it's also down and around my power steering pulley. It's all on, and there we go. Now I can look down. It's on my A/C compressor correctly. Feel down. It's on my crank pulley correctly, and back here it's on my alternator pulley correctly.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free, 888-844-3393. We're the company that's here for you on the internet and in person.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the serpentine belt on this 2003 Chevy Monte Carlo. It's the same part and similar process on these Monte Carlos from 2000 until 2005. The only items you'll need for this include a new serpentine belt from 1AAuto.com and a 3/8 inch ratchet.
Your tensioner is located right here and it's got a square hole in it. You want to just stick your 3/8 inch ratchet in there and then pull up on the tensioner. Then, just pull your belt from this pulley, release the tension on your tensioner carefully, and pull the ratchet free. Now, just pull your belt off the rest of the pulleys and pull it up and out. You're belt diagram is located right here, and you want to make sure you follow this belt diagram as you put the belt back on each of the pulleys. You can just refer back to this as you're doing this process.
You want to start with the lower pulleys. Just feed the belt down there and start placing it on the pulleys. You want to make sure your belt is in place on each of those pulleys except for this pulley right here. Then you want to take your ratchet, push it back into the tensioner, and pull back. Then put the belt up and onto that pulley. Once you have that in place, you want to make sure the belt stayed in place on all those other pulleys, so just look around and make sure everything is in order. Then release the tension on your tensioner and pull your ratchet free. You're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
6K703
