Replaces
Part Details
Specifications
Product Features
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years.
I'm going to pop the hood. Grab the handle right there. Pull it back. To release the safety, come over here, and then you're gonna pull up on the latch. That will come up. Then, pull up on the prop rod. Stick it right there.
All right, we're gonna take this 10 millimeter bolt out right here. We use a 10 millimeter socket and extension and a ratchet. Pull that out.
At this point, this light will come off, come straight forward. It looks like this piece has broken on this vehicle, but normally you'd have to pry a little bit harder to get this off.
We're gonna remove this disconnect connector right here. Just push down and pull.
Here's our old front turn-signal marker assembly, and here's our new turn-signal marker assembly from 1AAuto.com. As you can see, the colors are the same, the shape is the same. Flip to the back-side. The configuration of the mounting position is the same. You do have to swap the bulb and the socket over in the wiring harness. Get yours from 1Aauto.com, and you'll be ready to rock and roll.
So, I'm gonna pull this connector off first. Just slide it out, maybe a little bit tricky. Just slide it up, and then take the socket out, twist it to the left, and pull.
For the new one, we're gonna take this little piece off, and we're gonna line up the bulb socket. The bigger slots on the bigger holes, twist. And then take the connector, we're just gonna slide it on, just like that.
Then we're gonna connect the electrical connector, just like that. Then we'll align this tab up with that and slip it in. Take the 10 millimeter bolt, install that, then we'll snuggle this down, not too tight 'cause it is in plastic.
Put the prop rod down right there. Close the hood.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
