So far so good, oe fit.
Replaces
So far so good, oe fit.
Working well
Worked great. No issues.
Fits perfectly n works great
Works as expected. Seen no change in anything after replacing with this sensor. So happy to see it works as normal. no complaints
Works as intended.
Great
A little hard to get to, but very easy to install.
If your 2010 Rogue is equipped with a front condenser/dryer configuration, the low pressure switch is mounted to the dryer portion. This may be visible if you look through the grill. Most likely to the right of the condenser.
We do not have that information. You may want to check further online or a Haynes Repair Manual.
There could be multiple reasons why you're having this particular problem. We suggest taking your vehicle to a nearby reputable shop to identify the cause. Once you know the cause, we'll be happy to see if we carry the parts and how-to videos needed for your repair.
There could be multiple reasons why you're having this particular problem. We suggest taking your vehicle to a nearby reputable shop to identify the cause. Once you know the cause, we'll be happy to see if we carry the parts and how-to videos needed for your repair.
There could be multiple reasons why you're having this particular problem. We suggest taking your vehicle to a nearby reputable shop to identify the cause. Once you know the cause, we'll be happy to see if we carry the parts and how-to videos needed for your repair.
We would advise to contact your local dealer. We do not have the exact location for this sensor.
Written and video installation instructions are found on the product page under the "How-To & Tools" tab. We're constantly adding new installation video instructions. If we do not have one for your vehicle on the product listing page, please check again at a later time or check our Video Library to see similar repairs here: <a href="https://www.1aauto.com/videos" target="_blank">https://www.1aauto.com/videos</a>
Thanks for your inquiry. Written and video installation instructions are found on the product page under the "How-To & Tools" tab. We're constantly adding new installation video instructions. If we do not have one for your vehicle on the product listing page, please check again at a later time or check our Video Library to see similar repairs here: <a href="https://www.1aauto.com/videos" target="_blank">https://www.1aauto.com/videos</a>
This switch will come as shown in the images on the listing.
On the upper right side of the condenser standing in front of the vehicle, under neath the back plastic cover.