Replaces
About TRQ:
TRQ is a trusted brand dedicated to making every repair a success story by combining premium parts with easy installation. Each TRQ part is engineered by a team of automotive experts to meet or exceed OEM standards, delivering enhanced performance and maximum longevity. With rigorous in-house testing, the brand ensures superior fit and function across every product line. TRQ also provides customers with best-in-class, step-by-step installation videos—so you can complete repairs with confidence, whether you're a first-time DIYer or an industry professional.
Install Tip: When replacing steering components, have a professional alignment performed afterwards. This ensures proper tracking and even tire wear.
Our steering and suspension components are pre-greased and sealed for long life and do not require the extra maintenance typically required by greaseable versions.
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
This part fits 3 vehicles spanning 2003-2009.
| Year | Make | Model | Description |
|---|---|---|---|
| 2003-2006 | Infiniti | G35 | Infiniti G35 Front Inner & Outer 4 Piece Tie Rod Set TRQ PSA55211 |
| 2007 | Infiniti | G35 | Infiniti G35 Coupe Front Inner & Outer 4 Piece Tie Rod Set TRQ PSA55211 |
| 2003-2009 | Nissan | 350Z | Nissan 350Z Front Inner & Outer 4 Piece Tie Rod Set TRQ PSA55211 |
| Brand Label | Part Number |
|---|---|
| MOOG Chassis Products | EV80279 |
| MOOG Chassis Products | ES80579 |
| Beck/Arnley | 101-6041 |
| MOOG Chassis Products | ES80578 |
| DIY Solutions | SUS02384 |
| DIY Solutions | SUS07846 |
| DIY Solutions | SUS07847 |
| DIY Solutions | SUS07848 |
| Mevotech | MS30705 |
| Mevotech | MES80578 |
| Mevotech | MES80579 |
| Datsun/Nissan | D8640AL585 |
| Datsun/Nissan | D8521AL500 |
| Datsun/Nissan | 48640AL585 |
| Datsun/Nissan | 48521CD08 |
| Datsun/Nissan | 48521AL500 |
| Datsun/Nissan | 48521CD025 |
| Datsun/Nissan | D8520AL525 |
| Datsun/Nissan | 48640AM625 |
| Datsun/Nissan | 48640AL525 |
| Datsun/Nissan | 48520AM625 |
| Datsun/Nissan | 48521AL685 |
| Datsun/Nissan | 48520AL525 |
| Datsun/Nissan | 48521AL525 |
| Datsun/Nissan | 48521AL686 |
| Mevotech Supreme | MES80579 |
| Mevotech Supreme | MES80578 |
| Mevotech Supreme | MS30705 |
This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the right hand outer tie rod on this 2003 Nissan Maxima. Obviously the left hand is the same procedure. This is the same for any 2000-2003 Maxima as well as the Infiniti I30.You'll need a new tie rod from 1aauto.com, jack and jack stands, 15-21 mm sockets. You'll need a ratchet and probably a breaker bar or a pipe for some extra leverage, pliers, a large hammer, penetrating oil, as well as you will, or we recommend, you get an alignment after you replace a steering component like this.
Let's start off by removing the wheel. You're going to want a 21 mm socket and ratchet or breaker bar or your tire iron and you'll probably want to start with the wheel on the ground, loosen the lug nuts, then raise and secure the vehicle with jack stands, and then remove the wheel and the tire.
At this point we're going to measure the distance between the end of the boot and the center of the top of the tie rod. It's roughly 11 and 3/4 inches. Yours might be different. It's always a good idea to use some penetrating oil on the lock nut. Spray that down and let it soak in. With our adjustable wrench, size up the nut holding on to the end of the tie rod, with a 13 mm open ended wrench holding the inner tie rod and free it up. Move the steering wheel to the right to gain better access. We're going to remove the securing cotter pin through the outer tie rod. We're just going to speed it up here as Don tries to get that cotter pin out. We couldn't get the cotter pin fully out, so we're going to use our 19 mm, 1/2 inch wrench and then try and sheer it. In this case we're going to use a little extra leverage with the bar on the end of our wrench. I'll speed it up here as we work that bolt the rest of the way off. Quick summary: we tried to get the cotter pin out. It just wouldn't come out. It was basically frozen in there so what we did is took the pliers and broke the ends off as much as we could and then just got the socket on there and sheered the cotter pin right off by moving the bolt.
To help release the outer tie rod from the spindle we use a hammer and hit against the spindle until it frees up. Now it's free. Pull the inner tie rod with your 14mm wrench and twist off the outer tie rod. OK, speed up and Don did misspeak a little bit there: he is using a 13 mm wrench to hold that tie rod.
We got the old outer tie rod and the new one and you can see that dimensionally they're very close, so when they go back in the alignment should be relatively close to what it was before we removed it. It's always a good idea to put a little anti-seize on the end of your inner tie rod so that if you ever have to replace it again, it'll come off just as easily as this did. Holding the inner tie rod, twist the new tie rod on. Check our length from the end of the boot to the center of the tie rod and it is 11 and 3/4 inches just like it was when we took it out. Place the other tie rod back into the spindle. It can be a little stiff. Now we'll secure the nut and set our torque wrench to 55 foot pounds and we're going to torque the nut. Now what you do is make sure that the hole in the outer tie rod matches the slot or one of the slots on the nut and if it doesn't, giving it a little bit more torque is acceptable to the point where the cotter pin slides through the outer tie rod. Bend the ends that come through back along the side of the nut. With the 13 mm wrench hold your inner tie rod and lock down on the nut. Fast forward here as we take that lug nut back off, put the wheel and tire on, and just put the lugs on by hand first and then preliminarily tighten them. Set your torque wrench to 100 foot pounds and tighten the lug nuts. Use a star pattern. Kind of draw a star pattern as you tighten them and then just recheck them.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Perfect fit for my 2004 Infiniti g35 sedan base model. Second time ordering them and they come with everything and last forever I changed them just cause I wanted to redo my front end.
Items are as described, and are of OE quality
Works great so far!
Worked perfect. OEM fit and quality
Perfect fit. Easy for DIY.
Got here quick and was an easy replacement
Good quality parts. Got my alignment back into specifications, and the driving feel down the road is much better and more responsive
Tie rod Kit came with all hardware needed to install the new tie rods even some anti-seize thread locker , great quality product for the price, 2 months since install and still feel amazing and more responsive!
There awesome exact fit no problems at all just like oem
They fit right and make my g35 drive smooth, happy with this product
PSA55211
Only front
As long as it is a rear wheel driver model then yes, these will work for the coupe.
We do not sell a inner tie rod plate at this time and these parts will not have it included.
Yes, according to the information you provided, this part will fit your vehicle as long as it is a rear wheel drive model.
This kit fits the following G35 models and years: 2003Infiniti G35 - All models 2004-2006 Infiniti G35 Rear Wheel Drive only 2007Infiniti G35 Coupe Only
Thank you for your inquiry, Leonardo! This listing is for both the inner and outer tie rods, and it will do both sides of the vehicle. If you just need the outer tie rods then check out part number 1ASFK02868.
This part is only listed to fit the 2004 G35 with rear wheel drive, not the G35X.
Yes these will work for your application!
Yes theyre really well put together I recommend them.
Yes, these will fit your 2006 G35 Sedan.
