MAP Sensor TRQ ESA94889

Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.

Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.

In this video, we're going to show you how to replace a MAP sensor on this 2003 Chevy Monte Carlo with the 3.4 liter V6 Engine. The items you'll need for this include a new MAP Sensor from 1AAuto.com, a 7mm socket, and a ratchet.

Your MAP sensor's located right here, and it's got two bolts that go all the way through. Just push this harness through and then remove the bolts from the other side of the MAP sensor. We'll fast forward as Mike does this. Now push down on the tab of the harness and pull it free. Then lift up on the MAP sensor. Pulls from that hose. On the right is the old MAP sensor, on the left is the new one from 1A Auto. You can see they're identical and they'll fit exactly the same. Push the harness back into your MAP sensor. And you don't want to push it down all the way just yet. Just do it about half the way onto the harness. Then push it down onto that vacuum hose. Once you've got the hose all the way on, push the harness on the rest of the way. Then line it up and replace those two bolts. Clip this harness back into the bracket and you're all set.

We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.