Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
The bulbs are for testing and not covered under our warranty. Our warranty applies to the light assembly only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How To Replace Headlight and Bulb 2005-07 Jeep Liberty
Created on:
Tools used
Phillips Head Screwdriver
10mm Socket
Ratchet
1. Removing the Grille
Pry up the tabs at the top of the grille
Tilt the grille forward
Pull the grill up and out
2. Removing the Headlight
Remove the two 10mm bolts from the fog light
Pull the headlight forward
Disconnect the headlight wiring harness
3. Servicing the Headlight Bulbs
Twist off the socket ring
Pull out the bulb socket
Put the new socket into the headlight
Twist on the socket ring
4. Installing the New Headlight
Push in the new headlight using the locating tab
Insert the two 10mm bolts into the headlight
5. Reinstalling the Grille
Line up the tabs at the bottom of the grille
Tilt the grille in
Clip on the tabs at the top of the grille
6. Adjusting the Headlights
Tighten or loosen the Phillips head adjusting screw as necessary to change the headlight angle
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we show you how to replace the headlight assembly on this 2006 Jeep Liberty, and it's the same part and process on these Liberties from 2005 to 2007. The items you'll need for this are a new headlight assembly from 1AAuto.com, a 10mm socket and ratchet, and a Phillips screwdriver.
Start off by pulling up on the clip over the headlight. There's a series of these, just pull them up. You may have to push the grill in and then pull them up. Once you've done all six of them, just tilt the grill forward, and lift it up and out.
Next, you want to remove these two 10mm bolts, and we'll fast forward as Don does this. Once those are removed, pull the headlight out. To disconnect this harness, you just push on the tab and you pull it straight out.
If you're going to service the bulb, you would just turn that ring off, pull the socket right out, put your new one into place, twist the ring back on, and reconnect your harness.
On the left is the new one from 1A Auto, on the right is the old headlight. You can see they're identical, and they'll mount exactly the same. Plug in your new headlight, and push this tab into this hole right here, and just push your light back into place. We'll fast forward as Don replaces those two 10mm bolts.
Line up these five tabs with the four holes, and just push them down into place. Push your grill forward, and re-clip those clips along the top.
Here are the original headlights, here's the new ones from 1A Auto. You can see it makes the vehicle look a lot younger, a lot better. Again, here's the old headlights and the new headlights. Now, if you need to adjust the up and down angle of your headlights, you just go through this hole here, and you want to just tighten or loosen this Phillips screw. That will adjust the angle.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Product Reviews
Loading reviews
5.00/ 5.02
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
Make a car look like new and safer.
B
September 1, 2019
Easy, easy install the hardest part is popping the hood. Since the Jeep Liberty look stayed the same for like 12 years you cant tell if the truck is an 04 or a 12. The new headlight took years off the truck, by getting rid of the old foggy head light. Love it! Just watch the video to change it out. Thanks A1 Auto.
Headlight Assembly
Jay
January 15, 2021
The headlight assembly for my Jeep arrived quickly and intact. It installed easily on my vehicle and was a good fit.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Jeep is a registered trademark of FCA US LLC. 1A Auto is not affiliated with or sponsored by Jeep or FCA US LLC.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.