About TRQ: TRQ is a trusted brand dedicated to making every repair a success story by combining premium parts with easy installation. Each TRQ part is engineered by a team of automotive experts to meet or exceed OEM standards, delivering enhanced performance and maximum longevity. With rigorous in-house testing, the brand ensures superior fit and function across every product line. TRQ also provides customers with best-in-class, step-by-step installation videos—so you can complete repairs with confidence, whether you're a first-time DIYer or an industry professional.
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
This part fits
8 vehicles spanning 1999-2004.
Fits these Makes
Select vehicle
Year
Make
Model
Description
1999-2001
Jeep
Grand Cherokee
Jeep Grand Cherokee Front Driver Side Black Exterior Door Handle Black, Textured TRQ DHA49105
2002
Jeep
Grand Cherokee
Jeep Grand Cherokee Limited Front Driver Side Black Exterior Door Handle Black, Textured TRQ DHA49105
2002
Jeep
Grand Cherokee
Jeep Grand Cherokee Laredo Front Driver Side Black Exterior Door Handle Black, Textured TRQ DHA49105
2002
Jeep
Grand Cherokee
Jeep Grand Cherokee Overland Front Driver Side Black Exterior Door Handle Black, Textured TRQ DHA49105
2003
Jeep
Grand Cherokee
Jeep Grand Cherokee Front Driver Side Black Exterior Door Handle Black, Textured TRQ DHA49105
2004
Jeep
Grand Cherokee
Jeep Grand Cherokee Laredo Front Driver Side Black Exterior Door Handle Black, Textured TRQ DHA49105
2004
Jeep
Grand Cherokee
Jeep Grand Cherokee Overland Front Driver Side Black Exterior Door Handle Black, Textured TRQ DHA49105
2004
Jeep
Grand Cherokee
Jeep Grand Cherokee Limited Front Driver Side Black Exterior Door Handle Black, Textured TRQ DHA49105
Part Interchange
Brand Label
Part Number
Jeep
5GG27DX8AA
Jeep
55136351AD
DIY Solutions
BHS01243
Partslink Numbering System
CH1310116
Partslink Numbering System
CH1310115
Mopar
5GG27DX8AA
Mopar
55136351AC
Dorman - HELP
93564
This item may be interchangeable with parts from other brands with the above part numbers.
This information is provided only for reference and does not guarantee that the item you are
purchasing is identical to parts with part numbers from the brands listed above.
To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How To Replace Front Door Handle 2002-07 Jeep Liberty
Created on:
Tools used
T30 Driver
T20 Driver
10mm Socket
Ratchet
Phillips Head Screwdriver
Flat Blade Screwdriver
1. Remove the door panel
Pry up the little access panel behind the inside door handle.
Remove the Phillips screw exposed, as well as the one in the door pull.
Pull the door panel firmly to unpin the door panel.
Disconnect the door latch rod and the wiring harnesses.
2. Remove the outside door handle
Remove the speaker by removing the three Phillips screws and pulling the speaker out and disconnecting the lead.
Carefully peel back the water shield.
Unclip the door latch and rods from the door handle mechanism.
Remove the two 10 mm nuts securing the outside door handle using your socket and ratchet.
Using your T30 Torx driver remove the two bolts on the side of the door.
Remove the two T20 and one T30 bolt mounting the door lock mechanism from the door handle.
3. Install the new outside door handle
Install the lock mechanism into the new door handle, and secure it with the three Torx bolts.
Mount the exterior door panel.
Replace the two T30 bolts and connect the door latch and lock rods.
Bolt in the door handle with your 10 mm socket and ratchet.
Replace the water shield.
Connect the speaker lead and secure the speaker with the three Phillips screws.
4. install the door panel
Connect the wiring harness leads and the door latch cable.
Clip the door panel in.
Secure with the two Phillips screws.
Clip the access panel back in behind the inside door handle.
Brought to you by 1AAuto.com, your source for quality replacement parts, and the best service on the Internet. Hi, I Don from 1A Auto. I hope this how-to video helps you out. The next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video we're going to show you how to replace an exterior door handle on this 2006 Jeep Liberty. It's the same part and process on these vehicles from 2002 to 2007. We show you on the driver's side, but the passenger's side is a similar procedure. The items you'll need for this is a new exterior door handle from 1AAuto.com, flat blade screwdriver, a Phillips screwdriver, a 10 mm socket and ratchet, and T20 and T30 Torx bits. Start off by prying out this little panel behind your door handle. Now remove this Phillips screw, and this one down in your pole cup. We'll just fast forward as Don does this. Now pull out around the door panel to release the clips. When you get to the top, pry the door panel out. Once the clip pops free, pull the door panel up and off. On the back of your door panel, you want to release the clip on your door handle rod and pull the door handle rod down and out.
Then you want to push the tabs on both harnesses and release them. Now you want to remove the speaker. It's held in by these 3 Phillips screws. We'll just fast forward as Don removes those. Once you remove all three bolts, pull the speaker forward, push on the tab on the harness, and disconnect it. And then you just remove your water shield. You want to just carefully peel that off the door and pull the harnesses and your door handle rod through it. Ours was a little bit easier because it had been removed before. Take your time not to damage it. Up here on the back of your door handle, you can see there's a clip connected to the door handle rod. You want to just pry the clip off with a flat blade screwdriver and then pull that rod free. Down here there's another rod with another clip on it. You want to just push that clip off and then pull the rod out. Now on the back of the door handle there's a 10 mm nut there and a 10 mm nut right there. We'll just fast forward as Don removes those. Next remove these two T30 Torx bolts. Pull the door handle back and then angle it out of the door.
Right here you want to remove these two T20s and the one T30 bolt. Now remove the lock and put it into your new door handle and replace that T30s and those two T20s. We'll just fast forward as he does this and tightens them up. Just to show you a comparison, on the right is the old door handle; on the left is the new one from 1A Auto. You can see they're identical, and they'll mount exactly the same. Feed the new door handle back into place. Open the door and angle it back in. We'll fast forward as Don replaces those two T30 bolts. Now you want to push that lower rod back into place and re-clip it. It's hard to show but you also want to re-clip that upper rod. We'll fast forward as Don replaces those two 10 mm nuts. You want to put the nut just into the socket, feed it into place onto the stud, and then tighten it up. We'll fast forward here as he puts the door handle rod, the lock, and the harnesses back through the water shield, and then pushes the water shield back into place. Reconnect your speaker and line it back up, and replace those 3 bolts. We'll fast forward as Don does this and tightens them up. To replace your door panel, push the harnesses back into place. Push the door handle rod back into place and re-clip it. Then line your door panel up, and push it down onto the window sill and over that lock. Now make sure your clips are lined up and hit them in around the door panel. We'll just fast forward here as Don replaces those two Phillips screws and replaces that little panel behind the door handle.
We hope this video helps you out. Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll free 888-844-3393. We're the company that's here for you on the Internet and in person.
Product Reviews
5.0/ 5
★★★★★★★★★★
3 reviews
5★
100%
4★
0%
3★
0%
2★
0%
1★
0%
★★★★★August 24, 2023
Great fit
★★★★★July 12, 2018
Replacement door handle
It is a very good door handle. Helped me out of an emergency situation.
★★★★★March 12, 2017
Doorhandle
fast delivery at a reasonable price. Are used a YouTube video to install the door handle which made it easy. I definitely will shopping again at one a auto. Thank you
Showing 1–3 of 3 reviews
DHA49105
In Stock
Customer Q&A
Got a question about this part? Post it and get answers from our team.
No questions have been answered for this product yet.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Ask a Question
Check Your Email
We sent a verification email to .
Click the Verify Email button in the email to submit your question.
This extra step helps prevent spam.
Select Your Vehicle
Specify your vehicle's year, make and model to guarantee fit.