Replaces
Part Details
Specifications
Product Features
TRQ oxygen sensors are manufactured to precise specifications using premium raw materials to optimize your vehicle’s emission system. Each sensor is isostatically-pressed for improved strength and durability, and plasma-sprayed to improve sensitivity and prolong the service life of the sensors. Oxygen sensors wear out over time and should be replaced every 60,000 miles to prevent poor engine performance. TRQ recommends replacing the oxygen sensors in sets to optimize fuel economy and reduce overall emissions. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
What is Upstream vs. Downstream?
Install Tip: You may be required to reset the vehicle computer after installation of this part.
Returns: Parts with electrical components cannot be returned once installed.
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
OSA60486
Yes those sensors works great now if you have Maf flow sensor could be bad if your still getting a check engine light on just fyi if sensors don’t correct the issue
Hello Jeremy! This set of sensors will not be correct for your 5.7, but we do carry them for you. They will have to be purchased separately as we do not have a kit for that engine, but the part numbers are:
1AEOS00200 x2- Upstream
1AEOS00193 - Passenger Side Downstream
1AEOS00237 - Driver Side Downstream
Please let us know if you have any other questions. Thank you!
New light bulbs are not included with this assembly. Occasionally, manufacturers leave test bulbs in the lights. If you receive test bulbs, you'll want to replace them with your original bulbs or with new bulbs.
Yes this is a kit of 4 of the same O2 sensors.
Mine are in a 5.7 hemi. I will tell you two of the sensors failed within 3 months of install -- so I would be weary.
Currently, we do not carry this part for your vehicle. We're always updating our inventory so please check back soon!
Yes, this part will fit your vehicle.
These parts are listed to fit the 2014-2017 Jeep Grand Cherokee V6 3.6L.
These parts are interchangeable and will be able to work for upstream and downstream.
Actual Measurements are not listed or available. Our parts are exact replacements for your vehicle's OEM parts. As long as your year, make, and model match up with our listing, these parts will directly fit and function like the originals.
