★★★★★
May 12, 2026
It was easy to find the part I needed, and checkout was quick and easy. a pleasure to do business with you!
Part Details
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Universal Part Note:
This is a universal part and not a direct replacement for the existing part on your vehicle. In some situations, modifications may be necessary for it to fit and function properly.
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Hi. I'm Mike from 1A Auto. We've been selling auto parts for over 30 years.
What's up, guys? I'm Andy. Here is my personal 1983 Porsche 944. Today I'm going to show you how to reinstall a mirror. This mirror actually fell off the windshield. We're going to reattach it. If you need any parts for your vehicle, check out 1aauto.com.
Before we clean the inside of the windshield where the button used to beâ??you can see exactly where it wasâ??I'm going to take a crayon and just mark that location. That's where I want to put the new button when we go to install the mirror.
Next, we can take a razor blade or a scraper and we can scrape off on the inside of the glass. We want to take off any of this glue that was on there before. Peel that off. Make sure you clean it up really good. I'm just going to take a little bit of glass cleaner and a rag, and clean off the glass.
Next, on the back of the mirror, before I pull this little button off, I am going to use a razor blade because it's easier to hold the mirror while I scrape the button. I'm going to scrape all that glue off. That looks pretty good. I'll just take a little cleaner and a rag. Just wipe that off.
Next, I'm going to pull the button off. Before I do that, you want to keep in mind the direction that the mirror is going to go up on the windshield. So when I pull this off, I'm going to use a straight screwdriver, push it down a little bit, back and forth. This'll be similar on other models. It may not be exactly the same on different vehicles, but this is how it works on this 83 Porsche 944.
So we know that this is going to go to the windshield up. So what I'm going to do is I'm going to take a little piece of tape on the backside of the buttonâ??just like thatâ??and I'm going to mark an arrow going up so I know I can put it up to the windshield, just like that.
You're going to want to get a windshield mirror reattachment kit, and you're going to follow the instructions on the back. The way this one worksâ??we're going to use this. This is a cleaner that we're going to use first. We're going to pull this apart right hereâ??it's good to wear gloves while you're doing this. You can hold it on the backside hereâ??don't want to get this on your fingersâ??and we're going to wipe the button. This is going to clean the buttonâ??it's like a primerâ??just like that. And we're going to do the same on the windshield. We'll just clean that area right there where we're going to stick the button.
Next, after we let that primerâ??cleanerâ??sit for two minutes, we're going to use this adhesive. We're just going to put one little drop on the button, and then we're going to put it right to the windshield right away. And then we're going to hold it there for a minute. I use the tape to help hold it there. And then after that, we've got to wait 15 minutes for it to dry before we can hang our mirror back on.
Now we'll bring it over to the car. One little drop, hold it up to the thing, and then I'll just put a little pressure on it, hold it there for one minute.
Now that we've waited our 15 minutes, we can peel this tape off very carefully. I'm going to hold the button while I peel the tape. And then very gently, try to hold the button at the bottom so it doesn't move, and I'm going to slide the mirror on. There's a little tab right here that slides into the center of the button. Just slide it like that and wiggle it down just a little bit. And there we go.
Now that I've got that mirror on, I can take a little glass cleaner and clean off that mark we made with the crayon. This crayon was a little harder to get off than we thought, so I'll just use a little more glass cleaner, and just use a razor blade to scrape it off. Then I can wipe it with a towel.
Thanks for watching. Visit us at 1aauto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Tools used
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
If you need to remove your rear view mirror, there's a little tab right underneath here. You can grab it with your finger. With your other hand, just wiggle it back and forth and it will slide right up. That's the little lock tab, right there.
To reinstall, you're just going to line it up, and slide it down.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Tools used
Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years.
So if you had to remove your rear-view mirror, whether it was cracked or you are replacing the headliner and you had to get it out of your way, you can take a straight pick tool and slide it in the slot right here. You're going to aim it kind of towards the middle of the mirror a little bit and push and it'll slide right off.
So basically the pick tool goes in here and it pushes right on this lock right there. And that's what lets you release the mirror.
To reinstall the mirror, you can slide it up here and just lock it down in place.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
MIR03423
It was easy to find the part I needed, and checkout was quick and easy. a pleasure to do business with you!
Looks great installed real easy could not be more happy
Process was great but the mirror reflection quality Very Poor, distortion to the point it makes me ill to use.
I have purchased a few products already for the used Toyota Camry As usual exceptional quality products Like I have used them in the past I'm definitely exceptionally happy with their products
Good quality aftermarket replacement mirror. 1A Auto shipped it quick. Reasonably priced.
Just like from the factory. Always pleased with any item I order. Unbelievable affordable prices allowing me to fix up my truck. Always have exactly what I need. Some companies do not have parts for older collectible trucks. 1A-Auto always comes through. Thankful I found them and have done business with them for years. Never disappointed.
It is perfect fit.
Very good quality
Awesome!!
Great replacement, just follow the directions.
If the same style mount is on the one you are replacing then it will fit. But it will not be the exact same as your factory installed rear view
Yes, this part will fit your vehicle.
Actual Measurements are not listed or available. This is a universal part.
Yes. This is a universal part and not a direct replacement for the existing part on your vehicle.
This mirror is about 9" wide.
This is a universal mirror that will stick to any windshield just like we show in the video. If the part is not useful to you then you can send it back for a refund, but depending on the situation we cannot guarantee a refund for any additional shipping charges.
Yes, this mirror will have a metal tab just as shown in the listing images. It will also come with adhesive to complete the install to the windshield. Thank you and have a great day!
The mirror is appr. 9" wide. Thanks!
no. the mount well not fit
You may flip up the tab on the bottom and have a darker image on the mirror for at night when headlights may give a glare.
