Replaces
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Hi, I'm Mike from 1A Auto. We've been selling auto parts for over 30 years. We're dedicated to delivering quality auto parts, expert customer service, fast and free shipping, all backed by our 100% satisfaction guarantee. Visit us at 1AAuto.com, your trusted source for quality auto parts.
In this video, we're going to be working with our 1996 GMC Sierra K1500 with the 5.7 liter V8. We're going to be showing you how to remove and replace your vehicles ignition control module. If you like this video please click subscribe. We have a ton more information on this and many other vehicles. And, if you need this part for your truck, you can follow the link down in the description over to 1AAuto.com. Here are the items you'll need for this repair.
Lift up on the latches and remove the upper portion of your air box. Unplug the intake air temp and mass airflow sensors. Pop the breather line off and undo the thumbscrew. Rock the upper part of the intake forward and remove it from the vehicle.
Disconnect the connector on the ignition control module, and remove the two 5.5mm screws with a 5.5mm socket and ratchet. Remove the control module, and the heat sink from the vehicle.
Here we have our old ignition control module that we removed from our vehicle, and our new part from 1AAuto.com. As you can see these parts are exactly the same. They have the same connector and the same body of the sensor with the same two bolt mounting location. Now, what happens to these, is they tend to get hot and fail, which can create a rough running condition, or prevent your vehicle from starting at all, which is actually what this little tube of grease is included for. You apply this to the metal surface on the back of the ignition control module, before mounting it to the heat sink and reinstalling it. It helps to dissipate that heat from the module, and prevent it from failing. If your old module has gone bad, this new part from 1A Auto is going to in direct fit, just like your original equipment, and fix you up right.
Apply the grease included with your sensor to the metal backing. Go ahead and use all of it: the more the better. It's going to help keep that heat away from the module and keep it lasting longer and performing correctly. Spread the grease around on the back of the sensor. Make sure you coat all of the metal surface evenly.
Place the ignition control module back onto your heat sink and, start one of your 5.5mm screws. Place it back onto the bracket and start both screws by hand before tightening either one down fully. Tighten down the bolts with a 5.5mm socket and ratchet. Reconnect the electrical connector.
Lift up on the latches and remove the upper portion of your air box. Unplug the intake air temp and mass airflow sensors. Pop the breather line off and undo the thumbscrew. Rock the upper part of the intake forward and remove it from the vehicle.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Tools used
Tools used
Tools used
