How To Replace Power Mirror Switch 2010-17 GMC Terrain
Created on: 2014-02-12
How to repair, install, fix, change or replace a damaged, worn out, faulty or shorted power window switch on GMC Terrain, years 10, 11, 12, 13, and 14.
-
step 1 :Removing the Door Panel
- Pry off the trim piece inside the door handle with a pick
- Pry off the trim piece inside the door pull with a pick
- Remove the 7mm bolt inside the door handle
- Remove the two 8mm bolts inside the door pull
- Pry out the door panel by hand
- Lift the door panel up and off
- Disconnect the latch cable from the door handle
- Disconnect the wiring harnesses from the door panel
-
step 2 :Removing the Mirror Switch
- Disconnect the window switch wiring harnesses
- Pry up the window switch panel with a flat blade screwdriver
- Pry out the mirror switch tabs
- Push the mirror switch out of the switch panel
-
step 3 :Installing the Mirror Switch
- Push the mirror switch into the switch panel
- Push the switch panel into the door panel
- Connect the mirror switch wiring harnesses
-
step 4 :Installing the Door Panel
- Connect the wiring harnesses to the door panel
- Lift the door panel into place
- Push in the door panel clips
- Insert the 7mm bolt into the door handle
- Insert the two 8mm bolts into the door pull
- Push on the trim piece inside the door handle
- Push in the door pull trim piece
Tools needed
-
Flat Blade Screwdriver
8mm Socket
7mm Socket
Ratchet
Pick
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we show you how to replace the power mirror switch in this 2014 GMC Terrain, pretty much the same for any Terrain of this vintage, and the only tool you'll really need is a flat blade screwdriver.
In the video, we do remove the entire door panel. You don't have to do that. You can actually just pry up on the panel that the switch is in, pry that up out of the door, disconnect it, remove the switch that way.
Start off using a pick to remove this little panel behind the door handle and there's another panel right here and again, just pry it off. Next, remove this 7mm bolt and then remove these two 8mm bolts. Once those are removed, you can pull out along the edge of your door panels to release the clips and then pull your door panel up and off. On the back of your door panel, you want to release your door handle cable and, to do that, you want to pry up the end of this clip and pull back and then pull it forward and then up and out. Next, pull this harness from the door panel, and then push on the tab to release. To release this harness, you want to push on the two tabs on the bottom and then pull that handle back and your door panel is free.
On the back of your door panel, you want to disconnect the two harnesses on the bottom of your switch panel by just pushing on the tabs and pulling the harnesses free. Now, on the front of your door panel, using a flat blade screwdriver, or a pry tool, just carefully pry up your switch panel. Once you have it lifted, you want to pry it back and then it will pull up and out. Now, to remove your mirror switch, pry back the tabs, push on the mirror switch, and then pry out the tabs on the other side, and your mirror switch will pop free.
Take your new mirror switch and push it into place. Now, you want to angle your switch panel down with the front down first and it'll slide down into place. You have to twist it a little bit and now you want to push those clips back down into place. Reconnect those two harnesses to your switch panel.
To reconnect your door panel, push the harness into place, push that handle down, and then push this harness into place and take your door handle cable, push it down into place, pull it back and then slide that clip back on and put your door panel up over the lock rod and down into the window sill. Once you have it lined up, hit the clips in around the edge of door panel. We'll just fast forward as Don replaces those two 8mm bolts and the one 7mm bolt behind the door handle and replaces those two plastic panels.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
How to Replace Mirror Switch 1999-2005 Volkswagen Jetta and Golf
How to repair, install, fix, change or replace a damaged, worn out, faulty or shorted power mirror switch on 99, 00, 01, 02, 03, 04, 05 Volkswagen Jetta or Golf.
