How to Replace License Plate Light Lenses 2005-14 Chrysler 300

Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years! We're dedicated to delivering quality auto parts, expert customer service, and fast and free shipping, all backed by our 100% satisfaction guarantee. So visit us at 1AAuto.com, your trusted source for quality auto parts.

In this video we're going to be working with our 2006 Chrysler 300. We're going to show you how to remove and replace your vehicle's license plate lens in the rear bumper.

If you like this video, please click subscribe. We have a ton more information on this and many other vehicles. If you need this part for your car, you can follow the link down in the description over at 1AAuto.com.

Here are the items you'll need for this repair: Phillips screwdriver

Using the Phillips head screwdriver, remove the two screws from your license plate light. Once the screws are out, move the license plate light around and remove it through the hole, quarter turn counter clockwise or release the bulb socket and your plate light.

Now whether you're replacing your lens or just the bulb, this process is going to be the same only we'll now pop our old burned out bulb out of the socket and install a nice new one.

Here we have our old license plate light lens that we removed from our vehicle and our new part from 1AAuto.com. The difference here is pretty clear. You can see our old ones full of all kinds of dirt and debris. It's cloudy, it's difficult to see out of. The threads inside of the plastic tubes here have been completely stripped out from removing the rusted hardware. Our vehicle was painted at some point in its life, and these were clearly not masked very well. Pretty obvious difference how much more light is going to come through this. You could probably get pulled over for having something like this on there because you're not displaying your plate blatantly enough. If your old license plate light lenses have become dirty, clouded, cracked, broken or missing, we do have one missing from our vehicle, these new parts from 1A Auto go and direct fit just like your original equipment. We'll get your license plates lit up bright, safe and legal and fix you up right.

Reinstall the plate light. You can actually see how that little twist lock works now because it's clear, quarter turn clockwise and our bulb is secured. Slide the housing back up into the bumper, line up our screw holes and reinstall our two Phillips head screws. Once your plate light is secured down, you can repeat these steps on the opposite side, if necessary.

Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.