How to Replace Cabin Air Filter 2010-15 Chevy Camaro
Created on: 2017-03-22
New Cabin Air Filter from 1AAuto.com How to repair, install, fix, change or replace a dirty, dusty or clogged cabin air filter on 10, 11, 12, 13, 14, 15 Chevy Camaro
-
step 1 :Removing the Cabin Air Filter
- Raise the hood
- Pull up and move the weatherstripping
- Pry up the three clips from the passenger side of the cowl
- Pull up and remove the panel
- Remove the cabin air filter cover
- Remove the filter
-
step 2 :Installing the Cabin Air Filter
- Insert the cabin air filter into place
- Snap in the cabin filter cover
- Insert the cowl panel into place
- Press on the three clips
- Press on the weatherstripping
Tools needed
-
Flat Blade Screwdriver
Door Panel Removal Tool
Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years! We're dedicated to delivering quality auto parts, expert customer service, and fast and free shipping, all backed by our 100% satisfaction guarantee. So visit us at 1AAuto.com, your trusted source for quality auto parts.
To get to your cabin air filter, you'll start by raising your hood. Then up by the cowl, you'll see three clips. One here, one here, and one over here. You're going to want to remove those clips, but before you do that, you need to move this weather stripping out of the way. We'll do the first clip right here. A lot of the time, they come off in two pieces, so you got to take the center piece out and then the lower piece. Move on to the second one ... and over to the third one. Then we'll just pull up on this to remove it from the vehicle.
Here's your cabin air filter: trim removal tool
On top the cabin air filter, there's a protective cover, which has a clip on each side that you just push out of the way. You can see it on each side, and at that point, you can pull your cabin air filter right out.
The new filter from 1aauto.com, you can see is the same size and shape as the old one. It's just obviously a whole lot cleaner. The new cabin air filter has foam along three edges of it. One side does not have foam and that's the top. You're going to want the foam more towards the cabin area of the car, not the engine side, so we'll put it in just like this.
Once it's fully down, we'll take the cover and snap that into place as well. Now, you can place the cowl plastics back into place. Now, you can take your three clips. I like to take the bottom section of the clip and poke it down in each hole. Then, go right back with the centers of the clips and push each one all the way down. Now, you can reinstall your weather strip. Make sure it's all the way down and your cabin air filter is now replaced.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
How to Replace Cabin Air Filter 2007-10 Toyota FJ Cruiser
If the cabin air filter is dirty like in this video, check out these instructions to replace it
