★★★★★
March 19, 2026
Seems to be working fine
Replaces
About TRQ:
TRQ is a trusted brand dedicated to making every repair a success story by combining premium parts with easy installation. Each TRQ part is engineered by a team of automotive experts to meet or exceed OEM standards, delivering enhanced performance and maximum longevity. With rigorous in-house testing, the brand ensures superior fit and function across every product line. TRQ also provides customers with best-in-class, step-by-step installation videos—so you can complete repairs with confidence, whether you're a first-time DIYer or an industry professional.
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
This part fits 3 vehicles spanning 2004-2008.
| Year | Make | Model | Description |
|---|---|---|---|
| 2004-2006 | Acura | TL | Acura TL Power Steering Pump TRQ PSA67661 |
| 2007-2008 | Acura | TL | Acura TL V6 3.2L Power Steering Pump TRQ PSA67661 |
| 2005-2008 | Honda | Pilot | Honda Pilot Power Steering Pump TRQ PSA67661 |
| Brand Label | Part Number |
|---|---|
| DIY Solutions | SUS06433 |
| CARDONE New | 96-5441 |
| CARDONE New | 21-5441 |
| Hollander | 553-59155 |
| Hollander | 553-59094 |
| Honda | 56110PVJA01 |
| Honda | 56110RDAA01 |
This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
To remove your drive belt, you need to place a 14mm socket with a breaker bar on the auto tensioner to relieve the tension. Take a 14mm socket and a breaker bar, put it down in here. Place it over the auto tensioner. Pull to the rear of the car to relieve the tension on the belt. It's got significant tension on it. Feed it off the top pulley. Release the tension on it so we can take the breaker bar out. Got to guide the belt off of the pulleys.
Turn these tabs vertically to unlock them. Remove the engine cover. Before undoing the lines the power steering pump, we're going to drain some fluid out of the power steering reservoir. I'm going to use this suction gun, but if you've got like a turkey baster at home, that will work too. Just make sure you dispose of this oil properly.
I will reinstall the cap to the power steering reservoir so that nothing falls in there while we're working. Let me take some shop towels and cover the area under the pump, and we undo the lines. Even though I drained the fluid, some will spill out, so just use some shop rags to try to keep the food from going everywhere down the front of your engine. Additionally, replace the drain pan under the vehicle for any power steering fluid that might still.
Remove the clamp from the low pressure hose and squeezing it pair of pliers, sliding up the hose. Work it off the power steering pump. I'm going to take it and just feed it under here. I'm going to put it so it's like facing up. Doesn't pour fluid out. We'll remove the two bolts holding on the high pressure line. I'm going to try some rust penetrant on them.
Before you remove the high pressure line, there is an O-ring on the high-pressure line that needs to be replaced and cannot be reused. These are a 10-millimeter bolt. These are the 10-millimeter socket and a quarter inch drive ratchet. You don't want to break them. Take one free and break that other one free. If loose, turn them out. Place these bolts aside, so you don't lose them. Work this out of power steering pump. Just wiggling it back and forth going straight up. Some fluid is going to come out of this.
This O-ring is the one that needs to be replaced. I'm just going to wrap a shop towel around here to prevent any dirt getting in the hose. I'm going to place it right here. Get some tension to it. Just want to put it here so it doesn't get in my way. Remove the mounting bolts holding the power steering pump. There's one here on the back and one underneath. We'll use a 12-millimeter socket. Break one free. Go down, break the other free. We actually lift it up inside the bolt out.
Just going to lace it back there one because I need to remove the railing still. I'm going to hold on to the pump, it doesn't fall. If it loosens, I'm just going to lift up the pump out with the bolt in there. I'm going to pour out whatever power steering fluid is left in the pump into a proper disposal container. This is our old power steering pump from our vehicle. If they're going bad or make a lot of noise, it could be leaking fluid.
This is wet because we removed it and some fluid spilled out. There is also the seal that's in here from the high pressure line, can sometimes go bad and you'll end up sucking in air or make air bubbles in the power steering system so it make it hard to steer. There is also a seal at the end of this plastic tube on the low pressure side that can also fail and either leak or you'll get air bubbles in it. We can see on our new power steering pump from 1aauto.com, it does not come with the pulley. This will have to be transferred over. It does come with a new plastic low pressure side and there is no O-ring inside here. It's already installed. Before you put on your hose, make sure you remove this cap from the low pressure side. This is to keep debris during shipping if you're going inside the pump. I'm going to leave it on while we install it so that nothing falls in there, and I'll take it off right before I put the hose on. Same thing here.
This cap is just for shipping, keeps debris from going inside the pump. You can leave it on until you're ready to install the pump. This should work great if they're great in your car. With the power steering pump in a bench vice, taking some cardboard from our box to protect it from the jaws of the vice. Take some rust penetrant, spray it on the end of this nut. If you don't have a vice while this is still bolted into the car, you could try removing it, but it might be very difficult. I'm going to use a pry bar to brace the pulley from moving. Take a 19 millimeter. Try to remove it. Take that off now.
This pulley is pressed on the splines, but it came off pretty easily. I'm going to take our old pulley. I'm going to place it on our new pump. It does only go one way. This is the outside, this is the inside, so we want to make sure we put it like this. It's going to fit over those key ways. Slide down, get the nut on here, and start it. Take my breaker bar again. Embrace the pulley. Find a good spot to brace it against and two millimeter socket. Just tighten it down, just so you feel it get tight. Installing the new pump. I still have our protective caps installed so that nothing falls in there while we're installing it.
Take our bolts and thread them in by hand. Stall the rear bolts. Torque these bolts to 16-foot pounds. Before I put the low pressure hose on, I'm going to use this big funnel and just pour some genuine Honda power steering fluid down in here. Just a tiny bit to prime the pump before I start it. A towel into this as I remove it. It doesn't take much fluid, so I've also removed this cap and that allowed some of the fluid to pour down into the pump.
Now I'm going to put the low pressure hose on. Get back under the way, and get back on the leather hoses. Slide it over. Get the needle nose pliers, squeeze this together. Place it back. It's get a little grove where it was originally. To replace the seal on the high pressure line, take a small pick. Push the O-ring out of the grove. This one is pretty flattened out if there's any debris on there. Just one from here to stretch under the groove, and just stretch it over and roll it up in. It's seated all the way around in the groove.
You see, that one's nice and rounded and squishy. This one's real dried out and hard. Had some fluid spill into the bolt hole here. I'm not trying to work against that our steering fluid will I tighten that bolt up. Place the high pressure line into the power steering pump. Some fluid is probably in a squeeze out. It's seated. Ring solar bolts. Torque these bolts to 8-foot pounds. Brake parts cleaner to clean up any spilled power steering fluid. Take out all of your shop towels.
Reinstall the engine cover. It has two pins at the rear that's been in this two rubber grommets. These are the three pins at the front that you twist. Set these in the rear pin first. Adjust to put these into lock the holes for them. Just turn them and cover secure.
Feed the drive belt around the crank pulley, making sure it's seated in the grooves, over and around the A/C compressor pulley. It's easier to route it up into the alternator pulley and pull it over the idler pulley so the smooth side is on the idler pulley. Feed the rest of the belt up to the power steering pulley, then use your breaker bar with 14mm socket to unload the tensioner by pushing to the rear of the vehicle and slide the belt onto the power steering pulley.
Refill your power steering fluid reservoir to the full mark with fresh power steering fluid. I'm going to wrap a rag around the power steering bottle. I will start the vehicle with the cap off so that we can bleed the power steering system. Some of it may bubble up and out, so just I have the rag here to try to catch any that might spill. Just be careful there's going to be spinning belts here so you don't have a rag stuffed over here. Just keep it off to the side.
Start the vehicle. Work the steering wheel back and forth slowly and evenly, pushing the bubbles out of the system. Turn it lock to lock. After you've done that a couple times, shut it off and go check your fluid level. Repeat these steps as necessary keeping the fluid level at the full mark until the system has bled. When the system has bled, wipe up any excess fluid that may have spilled. Replace your power steering reservoir cap.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Seems to be working fine
Working great!
One of the high pressure line bolts stripped with barely any force. The install video (which was actually pretty good) said to torque the bolts down to 8 ft-lb. Both bolts kept turning and turning and wouldn't reach torque and then I felt one of them give and start spinning... stripped. Now I have to replace the whole damn thing again.
Love it, fix the issue.
Easy to install with the help of your great DYI video collection.
Working good
Fits like a glove... Would have liked if it came with an o-ring for the high pressure side as well
Stopped my Acura from bubbling over fluid and leaking. Works great still
The part was defective when it arrived. Once installed it did not work. My mechanic had to take it off and he ordered a part from another vendor. I contacted 1A about it, but all they did was send me a replacement part that I have no use for now. It would have been better to get a refund. Or even a store credit. I shop 1A a LOT. I love 1A Auto, but would not buy this part again if I needed one.
Fit perfectly and runs like a champ!
PSA67661
No, this part does not include the seal for the high pressure line and we do not offer it separately.
The o-ring is not included and we do not have the part number available.
No, a new o-ring is not included with this item. You may be able to reuse your original hardware if it is in good condition, otherwise, a new o-ring would need to be sourced locally.
1A Auto's house brand parts are manufactured by various aftermarket companies specifically for us and built to your vehicle's exact OEM specifications.
