Came with 14mm hex nuts on one side and 15mm on the other.
Replaces
Came with 14mm hex nuts on one side and 15mm on the other.
Wore out..clunked within 6 months
These do not last. I put these in April 2022 and both are already shot (Feb 2023) and need to be replaced. I just ordered OEM replacements: 51925S6M014 and 51920S6M014 and will be putting them in ASAP.
Im rating this item as a two star because I had to disassemble my strut two times. The TRQ part includes a strut mount bearing that does not rotate like the original Honda bearing. Because of this, my strut was binding every time I turned the wheel. I ended up really-using the Honda bearings and all was fine. The TRQ strut mount worked great, but the bearing did not.
Theyre stamped. They can go on either side, theyre just oriented differently
They should. Just some words of wisdom (maybe not wisdom lol) here, I had these and they failed after less than 2 years installed. That being said, my crv is lifted and suffers from positive camber which probably doesnt help. Ive ordered more expensive ones recently and camber bolts hoping to not have to change them again in less than 2 years.
This is not the correct part for your vehicle, but we do carry the one you need. The parts provided are specifically for the SI models. The correct part number for your EX is: 1ASFK01348 Please let us know if you have any other questions. Thank you!
Its Plastic
yes, it does.