★★★★★
January 14, 2026
Fit well cut old ones off
Replaces
About TRQ:
TRQ is a trusted brand dedicated to making every repair a success story by combining premium parts with easy installation. Each TRQ part is engineered by a team of automotive experts to meet or exceed OEM standards, delivering enhanced performance and maximum longevity. With rigorous in-house testing, the brand ensures superior fit and function across every product line. TRQ also provides customers with best-in-class, step-by-step installation videos—so you can complete repairs with confidence, whether you're a first-time DIYer or an industry professional.
Our steering and suspension components are pre-greased and sealed for long life and do not require the extra maintenance typically required by greaseable versions.
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
This part fits 5 vehicles spanning 2004-2015.
| Year | Make | Model | Description |
|---|---|---|---|
| 2004-2014 | Acura | TSX | Acura TSX Front Driver & Passenger Side 2 Piece Sway Bar Link Set TRQ PSA55710 |
| 2005-2007 | Honda | Accord | Honda Accord Hybrid Front Driver & Passenger Side 2 Piece Sway Bar Link Set TRQ PSA55710 |
| 2008-2012 | Honda | Accord | Honda Accord Front Driver & Passenger Side 2 Piece Sway Bar Link Set TRQ PSA55710 |
| 2010-2011 | Honda | Accord Crosstour | Honda Accord Crosstour Front Driver & Passenger Side 2 Piece Sway Bar Link Set TRQ PSA55710 |
| 2012-2015 | Honda | Crosstour | Honda Crosstour Front Driver & Passenger Side 2 Piece Sway Bar Link Set TRQ PSA55710 |
| Brand Label | Part Number |
|---|---|
| Beck/Arnley | 101-5300 |
| Beck/Arnley | 101-5301 |
| MOOG Chassis Products | K90456 |
| MOOG Chassis Products | K90457 |
| DIY Solutions | SUS01514 |
| DIY Solutions | SUS06773 |
| DIY Solutions | SUS06772 |
| Mevotech | MK90456 |
| Mevotech | MK90457 |
| Acura | 51320SEAE01 |
| Acura | 51321SEAE01 |
| Acura | 51325TA0A01 |
| Honda | 51321SDAA04 |
| Honda | 51320TA0A01 |
| Mevotech Supreme | MK90456 |
| Mevotech Supreme | MK90457 |
This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Hi. I'm Mike from 1A Auto. We've been selling auto parts for over 30 years.
Hey, everyone. Sue, here, from 1A Auto. Today, we have an 07 Honda Accord in our shop, and we're going to be showing how to remove and install the front sway bar links. If you need this part or any other part for your car, click on the link below and head on over to 1AAuto.com.
19 millimeter socket to loosen up the lug nuts. Now I'm going to raise and support my vehicle with my two post lift. You can use jack stands with a jack. Now we're clear to remove the tire.
14 millimeter wrench, I'm going to break that nut free and then of course it's going to spin. So I'm going to have to hold the inner part of it. There is an Allen head right here, but there's no way I can get there from that wishbone. I can do it on the top one, but not on the lower. So I'm going to have to hold the inner piece of metal with a pair of locking pliers.
Make sure you can get your wrench out. There we go. I'm going to remove the upper swivel link to the sway bar. 14 millimeter sock wrench again. See how much we can get before it starts to spin. It's spinning. Okay, so we'll put some locking pliers on the back just like I did on the bottom. See if I can hold that firm.
Wonderful. Now we can remove the sway bar link from the actual linking control arm. I'm going to just take a pry bar and see if I can pry that free.
To install the front sway bar link, it's just basically two reverse procedure. I like to put the sway bar link into the top of the sway bar first. The new nuts are a 15 millimeter, not a 14. It still has the Allen head in the center, which is a five millimeter Allen head.
Now I'm going to put the lower one in. Start the nut. With the wishbone in the way, I have found that it's kind of difficult to put an Allen head in there and hold that. So you're going to have to use a pair of the needle nose vise grips like I did to remove it just being careful, not pinching the new boot, using a gear wrench, ratchet wrench. I'm going to snug that pretty much as tight as I can get it because I'm going to end up torquing it.
Now I'm going to start the bottom. Put a pair of locking pliers on there, needle nose locking pliers. See if I can catch it without pinching that boot as careful as I can be. I'm going to put a longer wrench on here to tighten this because obviously I can't get a torque wrench in there. The specs for this is 22 foot pounds.
Now I can put a torque wrench on the top. So we're going to torque this to 22 foot pounds. Okay. Now we're ready to put our wheel back on. I'm just going to snug them up by hand then I'll lower it down on the ground with the weight of the vehicle on it and I'll torque the wheel to 80 foot pounds.
19 millimeter socket, and we're going to torque the wheel to 80 foot pounds in a star pattern. Double check. Now we're going to repeat the process on the other side.
Thanks for watching. Visit us at 1aauto.com for quality auto parts, fast and free shipping and the best customer service in the industry.
Fit well cut old ones off
Good item
fit 2011 accord perfectly
These were good quality and an upgrade from OEM end links. The nuts have a self-locking feature.
The sway bar links fit well and they look as good as the original ones. I am happy with the product.
A perfect fit for my 09 Accord sedan 4 cylinder. These feel much more rugged than the OEM part. Overall an easy install with the right tools.
My accord started making noise on the front end. Replacing these is about an hour job and totally worth it! These are built way better than the factory links.
I ordered these front sway bar links for a 2008 Honda Accord sedan. They arrived on the correct date. The links are a sealed unit, same a factory. The links are a heavier construction than the factory links, nuts are 15mm instead of 14mm. I viewed the 1-A video on DIY replacement, it was spot on. Very satisfied with the product.
The end links seem well built and beefier compared to the OEM ones. The rubber bushings seem higher quality and the metal rods are noticeably thicker than OEM. I replaced the OEM end links as they were worn out and were making a knocking sound every time I drove over a bump. The new end links fixed this problem. However, the end links do not have grease fittings to regrease them throughout time, so we will just have to see how these hold up without them. Overall, I am pleased with this product.
I purschased this product after learning that my sway bar links were rattling and needing replacing. They arrived in a short amount of time and were fairly easy to install and, after installing, the rattling noise stopped. Theyre made of a sturdy metal body which is much more sturdier than the plastic OEM parts that came with my car. Overall I would recommend this to anyone looking to replace their old sway bar links for a reasonable price point.
PSA55710
They are not side specific
This is not the correct part for your vehicle, but we do carry the one you need. The correct part number is: PSA66788.
Thank you for your inquiry! That is correct. These Sway bars links are interchangeable and will fit a couple and a 4 door Sedan.
Thank you for your inquiry. These parts will come pre-greased and sealed, and be ready to install on your vehicle when you receive them. Please let us know if you have any further questions.
