About TRQ: TRQ is a trusted brand dedicated to making every repair a success story by combining premium parts with easy installation. Each TRQ part is engineered by a team of automotive experts to meet or exceed OEM standards, delivering enhanced performance and maximum longevity. With rigorous in-house testing, the brand ensures superior fit and function across every product line. TRQ also provides customers with best-in-class, step-by-step installation videos—so you can complete repairs with confidence, whether you're a first-time DIYer or an industry professional.
Returns: Parts with electrical components cannot be returned once installed.
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Fuel Injectors 2001-06 Chevy Suburban
Created on:
Tools used
Flat Blade Screwdriver
Pry Bar
8mm Socket
10mm Socket
Slip-Joint Pliers
Ratchet
Cloth Rags
1. Depressurizing the Fuel Lines
Start the vehicle
Open the fuse box
Pull off the fuel pump relay, using pliers if necessary
Let the engine run out of gas and turn off
Turn off the ignition
Push on the fuel pump relay
2. Removing the Fuel Injector
Remove the 8mm bolt from the engine cover
Pull off the engine cover
Remove the four 10mm bolts from the fuel rails
Pry up the fuel rail with a pry bar
Disconnect the fuel injector wiring harness
Pry off the fuel injector clip with a flat blade screwdriver
Put a cloth rag under the fuel injector
Pull off the fuel injector
3. Installing the New Fuel Injector
Push the new fuel injector onto the fuel rail
Push on the fuel injector clip
Push the fuel rail down into place
Insert the four 10mm bolts into the fuel rail
Connect the fuel injector wiring harness
Push the engine cover into place
Insert the 8mm bolt into the engine cover
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace a fuel injector on this 2002 Chevy Suburban with the 5.3 liter V8 engine. It's the same part and similar process on these Suburbans from 2001 to 2004. The items you'll need for this are a new fuel injector from 1AAuto.com, an 8 and 10 millimeter socket and ratchet, and a flat blade screw driver. Start the vehicle and come over here to the fuse box, open it up, find the fuel pump fuse, and pull up on the relay. You may need to use pliers to do it. Then just let the vehicle turn itself off as it runs out of gas. Turn off the ignition switch and replace your fuel pump relay.
Now remove this 8 millimeter bolt in your engine cover. Fast forward as Don does this. Because this is a V8, you have four fuel injectors on either side of the engine, eight in total. To get access to them you want to remove these four 10 millimeter bolts, two on each fuel rail. We'll just fast forward as Don removes those. Pry up on the side that you're intending to change the fuel injector on. Then just lift up on this clip, and pull it out of the harness, and then push the small tab on top of the actual harness and disconnect it. Then, using a flat blade screwdriver, pry out this clip. Tuck a rag underneath the fuel injector. Then pull it free. Some fuel will come out.
Push your new fuel injector into place. Replace this clip. Push the fuel rail back down into place and replace those four 10 millimeter bolts. We'll just fast forward as Don does that and tightens those up. Reconnect the harness, and then, push that clip back down into the harness. Put your engine cover back into place. Then tighten up that 8 millimeter bolt. You're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
FIA60320
In Stock
Product Reviews
Loading reviews
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
GMC is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by GMC or General Motors Company.See all trademarks.
Select Your Vehicle
Specify your vehicle's year, make and model to guarantee fit.