2003 Chevrolet Trailblazer Front Driver & Passenger Side Lower Control Arm Mounting Bracket 2 Piece Set TRQ PSA62634

These beefy jawns replaced the OG brackets on my 2007 Trailblazer at about 235,000 miles. Over 4 years later and now at 262,000 miles, the bushings still feel and look new, helping give the front end a smooth ride. If you are looking to replace your LCA brackets, make sure you eat your Wheaties that day and have a heavy duty torque wrench, spec for LCA bracket to frame bolts are 192 ft-lbs! Front end alignment is also required after bracket replacement.

Joseph Verified purchase

Annoying pop in rt side bushing after installation. Pops when there is a weight shift and over one ven surface.double checked bolts, they are tight.

I heard many testimonials about how your products were no good, but in my experience I found that the parts I used from a1auto fit perfectly in my installation in my 2002 trailblazer with NO PROBLEMS with that said I will continue to use them

Although this bracket at the end of the day fixed the issue they did require a massive amount of machine work to get it to the correct spec. Brackets are .030 to .085 thicker than they should be and might not be good for anyone expecting a direct fit replacement.

Took a bit of finegeling to get in, but part seems solid. In hindsight, I think it would have been best to replace the whole lower control arm at the same time since the rubber is all the same age. Definitely do an alignment when you're done.

Perfect fit

Looking for lower tire rod for 2008Trail Blazer

Exact fit. Great quality. Came exactly how it was described.

Love it ????????????

recommend to anyone, fits perfectly and much more affordable then going to parts store. great option over getting whole control arm and end links are greasable