Replaces
About TRQ:
TRQ is a trusted brand dedicated to making every repair a success story by combining premium parts with easy installation. Each TRQ part is engineered by a team of automotive experts to meet or exceed OEM standards, delivering enhanced performance and maximum longevity. With rigorous in-house testing, the brand ensures superior fit and function across every product line. TRQ also provides customers with best-in-class, step-by-step installation videos—so you can complete repairs with confidence, whether you're a first-time DIYer or an industry professional.
Returns: Parts with electrical components cannot be returned once installed.
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
This part fits 3 vehicles spanning 2002-2006.
| Year | Make | Model | Description |
|---|---|---|---|
| 2003-2006 | Ford | Expedition | Ford Expedition Turn Signal Combination Lever TRQ SWA41811 |
| 2002-2005 | Ford | Explorer | Ford Explorer Turn Signal Combination Lever TRQ SWA41811 |
| 2002-2005 | Mercury | Mountaineer | Mercury Mountaineer Turn Signal Combination Lever TRQ SWA41811 |
| Brand Label | Part Number |
|---|---|
| Ford | 1L2Z13K359AAA |
| Standard Motor Products | CBS1172 |
| Wells | 1S3643 |
| Wells | SW3929 |
| Standard Ignition | CBS-1172 |
| Standard Motor Products | CBS1452 |
| ACDelco | 26102159 |
| Wells | SW2893 |
| Wells | 53-16655 |
| Duralast | SW2893 |
| PT Auto Warehouse | CBS2697 |
| Duralast | SW2894 |
| Dorman - HELP | 2330910 |
| NAPA | ECHDL6852 |
| Autopart International | 2502-511058 |
| Airtex Engine Management | 1S2697 |
| ACDelco | D6240C |
| Carquest Premium Vehicle Solutions | SAE1263 |
| Wells | SW2894 |
| Hollander | 629-00670 |
| Hollander | 629-00706 |
This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the turn signal switch on this 2003 Mercury Mountaineer. It's the same part and similar process on these Mountaineers from 2002 to 2005. The items that you'll need for this is a new turn signal switch from 1A Auto.com, a Phillips screwdriver, a flat blade screwdriver, 7mm socket and ratchet, and a 7/32 socket or a 5.5mm socket.
Remove these two 7mm bolts. Move your steering wheel up, and then pull this panel straight back and towards you. Then remove these two Phillips screws. Now, pull the panel down on both sides. It'll unclip. Then you can pull that forward, and then you just want to remove this Phillips screw right here. Pull this grommet up and out, and then lift this panel up.
Then, you can access this 7/32 bolt right here. Let's go ahead and remove that. Now just push in this tab and the switch will pop up so you can push it out the rest of the way. Then you want to disconnect these harnesses. For this first one, it's easiest if you use a flat blade screwdriver and just pry it free from the switch. You can see there's a tab on the bottom, and it just unclips. Then just push the tab on the harness and disconnect it. Do the same thing with these two. Then your switch is free and you can just pull it out of that plastic cover.
Up top is the old switch; below it is the new one from 1A Auto. You can see they're identical and they will fit exactly the same.
Now, just feed the switch back through that plastic cover and reconnect your harnesses. You can just push that harness back onto that clip and reconnect it. This tongue and this tongue here go into these grooves, so you want to put it down in place. I'm actually pulling forward on it as I slide it down in. We'll fast-forward as he tightens that bolt up.
Now, put your top back in place, and you can see right in here. Just make sure that this comes down and none of the wires get out of place. This should be down, and on the other side it's down as well. Now, replace this Phillips screw. Feed that panel back into place making sure your wires are out of the way, and then just reclip it.
Push this grommet back down into place until it clips back in. Then, push this side of that lower panel back up. Now, replace those two Phillips screws. Then push this panel straight back into place. Replace those two 7mm bolts, then you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
received first one, when installed headlights wouldn't go off. You sent a replacement and this one is faulty also, now right turn signal won't cancel after turn. Haven't had time to deal with
Looked good, installation was fairly easy after watching the informational video. Issue I have is on right turns the signal does not return to the off position automatically. It does while making left-hand turns thinking hopefully it'll get broken in through use.
Product was as shown and worked great. The videos that are provided are very helpful and is the reason i buy from 1a auto.
Works finest
The Turn Signal Combo arrived within a week. Used the utility YouTube video to walk me through the process. Went extremely well and works great. The old one was 20 years old and had started the windshield wipers for a few swipes after the turn signal clicked off. Thanks for a good product and info on the do it yourself.
Installation was easy. Good video tutorial. I do have a problem with the unit. The signal won't turn off after completing a turn. The "ratchet" effect from the device that should turn the signal off engaged. I can hear it. However, I need to finish turning the signal off manually. I am not sure if the internal spring is too weak to complete the job or if the rubber boot is too stiff and prevents the turn off from completing after the turn. The device works. It just won't finish turning off. Again, I can hear the "automatic" turn off click and attempt to complete the turn off. But I need to manually finish the task. I can feel that the "ratchet" has been activated on the return. The problem is in the spring and/or the rubber boot. Suggestions?
I'm not thrilled with this. Left turn works fine but the right turn doesn't cancel. Old switch worked fine. At least the truck has the buzzer when the signal is left on too long. This was bought because the high beam switch stopped working. This works fine on the new one.
Work goods but still got to do it manually
It does not work in my 2004 Ford Explorer. It stops and starts. It does not cancel after turning a corner. I am not happy with it at all.
part fit well like oem/dissappointed in waiting several daysfor part, thats why I deal with local partsstores.To me price is not a factor, just Quality and speed in access of part. Thought I would try online because everyone is doing it.
SWA41811
We had the same problem on my sons vehicle and replacing the turn signal lever switch did correct this issue for us. Hope this helps!
