★★★★★
October 31, 2023
Good product
Works as it should. Fixed the issue of the fuel gauge not reading right.
Replaces
Part Details
Specifications
About TRQ:
TRQ is a trusted brand dedicated to making every repair a success story by combining premium parts with easy installation. Each TRQ part is engineered by a team of automotive experts to meet or exceed OEM standards, delivering enhanced performance and maximum longevity. With rigorous in-house testing, the brand ensures superior fit and function across every product line. TRQ also provides customers with best-in-class, step-by-step installation videos—so you can complete repairs with confidence, whether you're a first-time DIYer or an industry professional.
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
FPA79808
Works as it should. Fixed the issue of the fuel gauge not reading right.
got lost in the mail and they sent another one free of charge. put it in and it worked flawlessly. 5 stars for both part and seller
Works it it should so far 94 f150 302 v8 dual tanks
Works great
Direct replacement for the fuel level sensor on an oem sending unit. Saved about 50 dollars vs buying a whole new sending unit and wasnt all that difficult to put on. Only tricky parts were the fuel line connections. Once the unit is out of the tank its only 2 screws and a wire, then youre good to go. Overall very satisfied
The level arm is way too long. Will not fit properly in the tank of 91 f150. Had to take the new one apart and use the arm of the old one. Look up other levels and pay attention to the length of the arm or compare to stock if you got it out and you will see the L is way too long.
Bolted right in,, works good,, way cheaper than parts store.
I was having issues with my fuel gauge not reading the level properly on my 1995 F150. I have dual tanks and while the rear tank was still reading the level the way it should, the front tank gauge sits on E all day no matter if the tank is full or not. I did someresearch and found the bobber on the fluid level sensor can sometimes dismissible I the tank which causes it not to read properly. I saw 1AAuto the part I needed so I ordered it and it was here within a week! It attached to my fuel pump just like the previous one and Ive had zero issues since!
Great sensor ,fit like oem , fast shipping.
We were really grateful for 1A auto and their help in getting us the part we needed. It worked great, we just had to adjust the arm a bit so it would detect fuel levels more accurately. Their super fast shipping was extremely helpful in getting the job done. Thanks!
This part is listed to fit the 1997 Ford F350 V8 4.9L, 5.8L, and 7.5L vehicles.
Yes, this part will fit your vehicle.
Thanks for your inquiry. This part is specific to vehicles with a particular set of options. We will need more information about your vehicle to confirm the fit. Please provide your 17-digit VIN and we can confirm the fit for you. Thank you!
Thank you for the inquiry. Yes, according to the information you provided, this part will fit your vehicle in the front. Please let us know if you have any other questions!
Thank you for the inquiry! Yes, this will work on the front tank. Please let us know if you have any additional questions.
Thank you for the inquiry. Yes, according to the information you provided, this part will fit your vehicle. It is made the same specifications as your OE. Please let us know if you have any other questions!
I used it on 16 gal tank, but should work for the 18 it will probably read empty before it actually is. You could measure the tank depth and compare to distance from the bottom of pump flange to where the float hangs and bend the rod some, or just use your old float rod if its still good. Either way this is better option than spending over 100 bucks on an OE sender or complete fuel pump.
Yes
