Replaces
Frequently bought together
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Install Tip: You may be required to reset the vehicle computer after installation of this part.
Highest Quality MaterialsMade from highest quality materials that meet or exceed OEM standards
Quality Tested - built to a strict level of product standards.
Item Condition:
New
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace a mass airflow sensor on this 2001 Ford Taurus. It's the same part and similar process on these Tauruses from 2000 to 2003.The items you'll need for this are a new mass airflow sensor from 1AAuto.com, a flat blade screwdriver and a 10mm socket and ratchet.
Your mass airflow sensor's located right here. Just push the tab on the harness and pull it free. Now, you want to loosen up this hose clamp with your flat blade screwdriver. Then pull that hose free.
Now, flip up this tab here and pull the clip back and do the same thing to this one right here. Now, you can lift the top of your air intake box, straight out. Then pull it from the hose and out.
Next, remove these four 10mm bolts holding the mass airflow sensor to the top of the air intake box. Now, the sensor pulls free.
Take your new sensor and push it into place. Replace those four 10mm bolts.
Push these tabs down to these two slots. At the same time, make sure it goes back into that hose. Push the hose further into place. Re-clip the top of the air intake box.
Tighten up that hose clamp. Reconnect your harness. You're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
