As an Original Equipment Supplier, Delphi Automotive products from 1A Auto come directly from the source. You wont have to worry about going to the dealership for Original Equipment - these parts are the exact same as the original. Delphi products come with the same quality from the dealership at a lower cost to you.
The ignition coil pack is a crucial part of your ignition system. It's function is to convert the 12 volt power of your vehicle's electrical system in to 35,000 or more volts. This produces a high intensity spark at the spark plug which then ignites the fuel in the cylinder. Coils in general will wear out over time.
Returns: Parts with electrical components cannot be returned once installed.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Ignition Coil Pack 1990-2011 Ford Ranger
Created on:
Tools used
8mm Socket
7mm Socket
Ratchet
1. Remove the ignition coil.
Mark the plug wires to keep track of where you pulled them from.
Unplug all the plug wires.
Disconnect the wiring harness from the ignition coil.
Unbolt the two 7 mm and two 8 mm bolts to remove the old coil.
2. Install the new ignition coil
Mount the new ignition coil and bolt it in.
Make sure the little resistor attached with the bolts gets reassembled into the ignition coil assembly.
Plug in your plug wires in the order that you pulled them, using your marks.
Brought to you by 1AAuto.com- your source for quality replacement parts and the best service on the internet. Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing or maintaining your vehicle. I'm going to use my 20-plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts, installed correctly that's going to save you time and money. Thank you and enjoy the video.
In this video, we're going to replace the ignition coil on this '04 Ford Ranger with a 4.0L. This coil does fit many Ford V6s from 3.0L up through 4.2L V6s. The only tool you'll need for this truck is a 7 mm and 8 mm socket and ratchet.
Coil on this is a 4.0L in a Ranger; this coil is the same for anything from a 3L to a 4.2L V6. To change the coil, the first thing I've done you can see I've marked these plug wires. I've just marked them basically one, two, three, four, five, six, closest to me then going around in clockwise order. For those of you that know engines, it has nothing to do with the firing order or what number plug these go to. It's just so that when I put them back on the coil, I'll put them on in the right order. If you're planning on changing plug wires, I suggest you replace the coil first and put the plug wires back on, and then just replace the plug wires one at a time.
For this video, we're just doing the coil. I'm going to remove all these wires. It's just a matter of squeezing the kind of lock here, and pulling up and off. These wires from over there, out of the way and these wires over here. Now your connection is right back here. Pull up on here and pull that connector right off. The coil is held on with four well, two bolts and two nuts. These are 7 mm bolts here and 8 mm nuts on the back, and I'll remove those.
Once those four bolts are out, coil comes right up and off. Here's our old coil. Here's our new coil from 1A Auto. You can see everything's the same. It's going to bolt up all the same. You can screw it right down on there. There's a little resistor or capacitor or something here that goes on with the bolt, so make sure you get that correct.
Check these and make sure they're as tight as I want them. Put our connection back in, then our wires. I guess I've got number three here. Again, the marks I have on these wires have nothing to do with the cylinder number. They only pertain to the closest one to me, one, two, three, four, five, six and then around clockwise. Four, five, and six. Now we can start it up and everything should be nice and smooth.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the internet and in person.
GN10178
In Stock
Product Reviews
Loading reviews
5.00/ 5.02
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
Ignition stumbling corrected
James
June 14, 2018
Had been feeling infrequent but noticeable engine "stumbling" (not a misfire) under moderate acceleration. After the very easy task of replacing this coil pack my problem has been resolved! Should have thought of and acted on this weeks ago!
2006 Ford Exp
Wesley
January 27, 2021
All fit as they should No Trouble At All. Thank You
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Mercury is a registered trademark of Ford Motor Company. 1A Auto is not affiliated with or sponsored by Mercury or Ford Motor Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.