★★★★★
October 21, 2023
Wonderful Part
Worked great I'm in Alaska and have heat again, exactly as advertised
Replaces
About TRQ:
TRQ is a trusted brand dedicated to making every repair a success story by combining premium parts with easy installation. Each TRQ part is engineered by a team of automotive experts to meet or exceed OEM standards, delivering enhanced performance and maximum longevity. With rigorous in-house testing, the brand ensures superior fit and function across every product line. TRQ also provides customers with best-in-class, step-by-step installation videos—so you can complete repairs with confidence, whether you're a first-time DIYer or an industry professional.
Returns: Parts with electrical components cannot be returned once installed.
Left Hand Drive:
All of our auto parts are intended for Left Hand Drive USDM vehicles. If your vehicle is Right Hand Drive, please ensure the part is correct for your specific vehicle.
Attention California Customers:
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
This part fits 3 vehicles spanning 2001-2007.
| Year | Make | Model | Description |
|---|---|---|---|
| 2001-2007 | Ford | Escape | Ford Escape HVAC Blower Motor Assembly TRQ HMA84836 |
| 2001-2006 | Mazda | Tribute | Mazda Tribute HVAC Blower Motor Assembly TRQ HMA84836 |
| 2005-2007 | Mercury | Mariner | Mercury Mariner HVAC Blower Motor Assembly TRQ HMA84836 |
| Brand Label | Part Number |
|---|---|
| Ford | YL8Z 19805 DA |
| Partslink Numbering System | FO3126119 |
| Ford | YL8Z19805DA |
| Hollander | 615-00683 |
| Hollander | 615-00620 |
This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace an A/C and heater blower motor on this 2002 Ford Escape, same as any 2001 to 2007. Also the same for the Mercury Mariner. The only tool you'll need is an 8mm socket with a ratchet and extension.
The blower is right here, near your passenger's feet. It's held in by three bolts. You can see one right up in there, one there, and then, one right there. The first step in the process is you actually want to disconnect your blower motor resistor which is further under the dash. There's a little tab on the backside that you push. Then, pull that connector down and off. Now, you want to disconnect the blower motor and you pull the harness up and out of the clip. There's another clip that holds the connector on. Pull that down with your finger, and then pull the harness off. Now, I'm going to fast forward here as I remove the three bolts. Basically the blower motor comes right down. It is a little bit of a tight fit so it requires a little bit of force to get it out between the air duct and the kick panel on the side. If you really watch close, you'll notice that when I filmed this I did not unplug the heater, the blower motor resistor first. The harness got in the way a little bit, so I definitely recommend unplugging that blower motor resistor first.
Prepare the new motor. I use a little bit of contact cement to glue on the foam pad. Make sure that you compare the two. Put this in the right place and also a little bit of contact cement to glue on this gasket on the other side. Put the plastic down on it.
From here, it's a reverse of the procedure. I'm going to speed through it. You basically just force the motor up in there. You kind of twist it into place and get that protrusion that's on the back of the motor up into place. Start a bolt by hand. Start two of them by hand. Tighten those two up then put the third one in that's over closer to the kick panel. It's usually easiest to do it that way. Once you get everything tightened up, later on here, I will just reconnect both harnesses and it'll be good to go.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
HMA84836
Worked great I'm in Alaska and have heat again, exactly as advertised
5 star
Works great, another blower motor I purchased required me to cut the wires. I didnt want to do that so I purchased the one from 1A auto. It was as the original was, plug & play with the blower cage attached.
An easy installation with a correct replacement part. The fan cage attachment to the shaft appeared to be better than original equipment, so I have high hopes this will last as long or longer.
100% Would recommend this part. Works like it should and Fast shipping
My old blower fan (factory) split down the middle. Got this as a replacement and was not disappointed. This model has a metal washer bit you can see in the picture to help prevent the exact type of split that my factory blower developed. Works great and is maybe 5% quieter than my old blower.
It does not include foam or the rubber seal. This item will come exactly as pictured in the listing.
