★★★★★
October 24, 2025
Everything came in time, great price, car drives like new again I would highly recommend 1A auto.
Replaces
Part Details
Specifications
About TRQ:
TRQ is a trusted brand dedicated to making every repair a success story by combining premium parts with easy installation. Each TRQ part is engineered by a team of automotive experts to meet or exceed OEM standards, delivering enhanced performance and maximum longevity. With rigorous in-house testing, the brand ensures superior fit and function across every product line. TRQ also provides customers with best-in-class, step-by-step installation videos—so you can complete repairs with confidence, whether you're a first-time DIYer or an industry professional.
Product Features
TRQ suspension kits are manufactured using premium raw materials and coatings for extended service life. Each TRQ suspension component is designed to be a direct, maintenance-free replacement to the stock unit. To extend the life of your steering and suspension components, TRQ recommends replacing components in pairs, sets, or kits. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Our direct fit gas-charged shock absorbers help restore your vehicle's handling and ride quality to just like new.
Replacing struts used to require specialized tools to compress, remove, and transfer the old spring and mount. Our Pre-assembled, complete strut & spring assemblies come with all new parts and make the job much quicker and easier for the do-it-yourself mechanic.
Strut & spring assembly contains:
Our steering and suspension components are pre-greased and sealed for long life and do not require the extra maintenance typically required by greaseable versions.
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet. Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video we're going to show you how to replace a front strut on this 2002 Ford Escape. The strut is the same for any 2001-2011 Escape, although getting the wheel off may be a little different for different vehicles. We show you the driver's side. Obviously, you want to replace struts in pairs and the passenger side is the same procedure. Tools you'll need are a jack and jack stands. You'll 10-19 mm sockets and wrenches. You'll need the ratchet, some extensions, a breaker bar or a pipe, because you'll need some extra leverage on some of those nuts and bolts. Flat blade screwdriver, large hammer, a 5 mm Allen wrench, and a torque wrench.
First, with the vehicle on the ground, you're going to remove the four bolts at the top of the strut right here in the engine compartment. Use a little bit of penetrating oil, make it a little easier to get them off. Let that sit for a minute. These bolts should only be tightened to 35 foot pounds, so they should come off pretty easy and they are 14 mm. Now, using a jack, raise the vehicle up off the ground, putting the jack right underneath the front control arm. Then make sure you put a safety jack stand underneath the frame rail there. Next, remove the wheel and tire. If you don't have the benefit of air tools, loosen the lug nuts while the wheel is still on the ground, then raise and support the vehicle and remove the tire the rest of the way.
Now we're going to have to remove this bolt here, which allows these brackets to just kind of move to the side. We'll need an Allen wrench and a wrench to remove this bolt that holds the stabilizer link. Then there's two large bolts here that we need to remove. Again, coat everything with penetrating oil and let them sit for a while. Again here I'll use a little fast motion as I remove that. The bolt that holds the bracket in place is a 10 mm and it can be a little difficult. In fact, you may break it on some vehicles. If you do break it, you'll have to just source a similar bolt from the hardware store. Okay, one thing I didn't go over, there is a clip that holds the brake line in, just use a large screwdriver and pry that clip out. It comes out pretty easily. Then we'll let the brake line down and out of your way.
Okay now, this probably about the most difficult part. I've got a 14 mm wrench on the nut that connects the stabilizer to the strut, then I take another wrench, connect it to it and that gives me some extra leverage and I can start the nut spinning. Then as you get it looser, usually the stud that's part of the stabilizer link will start spinning as well. See here, I take the 5mm Allen wrench and put it into the stud and the stabilizer and work it in there really well. It's usually kind of rusted in there. Maybe take a small screwdriver, clean it out a little bit. Really work that Allen wrench in there well and then hold the stud with the Allen wrench. Okay, this is where it gets difficult. If you have a torch or a Sawzall, I could recommend that you cut the stabilizer link stud and then just put a new one in, but most of the time you want to save that. Basically what you do is you loosen the nut up as much as you can while you're holding the Allen wrench and once you can't loosen it anymore, then you tighten it back up. Spray it with penetrating oil again, loosen it up again, tighten it up. Spray it with penetrating oil, keep loosening it and I probably did this a total probably of about 15-20 times and finally it worked the lock nut all the way off.
Okay, so now we're on to the large bolts that hold the strut at the lower end. You can see I have an 18 mm socket and I'm actually using a pipe and a ratchet. The pipe gives me some extra leverage. What I do is I position the wrench right up against the vehicle and then pull with the pipe. Okay, then we'll fast forward here as I use my impact wrench, put it on there and get that bolt off the rest of the way. Okay, here on the second bolt, you're going to see the bolt actually breaks and that's probably going to happen just about half the time with these. Okay, use a hammer and a punch to start driving the bolts out and then you can let down the jack that releases most of the pressure off the strut and then the bolts will come out and then you remove the strut. Okay, so here is our original strut, and you can see that the spring is actually broken. This vehicle was making a clunking noise whenever you turned the wheel and sometimes when you started out and stopped.
Here's our new strut from 1A Auto. The spring is assembled. It's got all the right brackets and everything on it. Just going to remove the nuts from the top here. Okay, so now we're going to take the new strut and make sure that the bracket that goes around the steering knuckle's pointing out, put it down through between the tie rod and the lower control arm and then bring it up in to place. Kind of get the lower mount set on the steering knuckle, so it kind of is now roughly in place. Now you can go up top and just take your nuts and, if you need to, you can jack up the jack a little bit, but just get those four studs on top in place, put those nuts on, and then just kind of preliminarily tighten them up; you'll torque them later. Okay, from here on out, it's pretty much a reverse of the procedure. You can see I lift the steering knuckle up and kind of work it in the position and get both of the bolts through the strut and into the steering knuckle. Then put on washers and lock nuts and obviously, because one of them broke, I'm using two brand new bolts. Now here I'm jacking the car back up to put the weight back on to the suspension. Tighten and torque these bolts to 85 foot pounds. Torque these upper bolts to 35 foot pounds.
Just speed up as I do those last two. Okay, and now to put the stabilizer link back together. It goes back together a lot easier than it comes apart, needless to say or regardless, I just use a little bit of penetrating oil on there anyways, then use the 5 mm Allen wrench and the 14 mm wrench and tighten that up. It does go a lot faster when you're at about seven times speed too. Now, put the bracket back in place and put that 10 mm bolt, again, if that bolt broke use a, it's probably about a M8 self tapping bolt that just kinds of bolts into the strut. Then put the brake line back in place. Use a small hammer to tap the clip in place. Then just check and make sure nothing's rubbing or chafing on anything. Now, put your wheel and tire back in place. Put the lug nuts on and just kind of tighten them preliminarily. You want to torque them once the vehicle's back on the ground and secured. Set your torque wrench to a hundred foot pounds and then tighten them up using a star pattern as the order and then put your cap back in place.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
What's up, guys? I'm Andy from 1A Auto. In this video, I'm going to show you how to replace the front struts on this 2012 Ford Escape. If you need this part or other parts for your vehicle, click the link in the description and head over to 1aauto.com.
One thing you're going to want to do anytime you do any kind of front-end repair or suspension repair, you're going to want to go to a local shop and have your alignment performed. Otherwise, you're going to have premature tire wear.
I've raised and supported the vehicle, and I took the tire off, and now we're going to take this nut off. I'm going to use a pry bar and a 1 1/4 socket and a breaker bar. I'm going to use the pry bar to prevent the hub from spinning. I'm just going to set this up, just like that. Spin this around, and then the ground is going to support that from spinning. Just loosen this up.
Now that nut is loose. Now I can raise the vehicle up to chest level. I'm just going to use some pliers. I'm going to take this clip off that holds the brake line on. Just grab it and slide this out, just like that. And we can take this brake hose; slide it out of our way.
I'm going to take a 10mm socket, extension and a ratchet. Take this bolt out, right here. This holds the bracket for the ABS wiring harness. It's pretty rusty. If you have to, put a little rust penetrant on there. Pull that out. Slide that out of the way. Just so I don't break it, I'm going to take the bolt out, right here, that holds the ABS sensor in. I might be able to do it without taking this out, but I don't want to break the wire. Take that out. Pull this out of here. Slide that out of the way.
Before I take this nut off, I'm going to use a little bit of rust penetrant because—just make it easier taking it off. Let that soak for a little bit. With a 15mm wrench, I'm going to slide that over the nut, and then I can hold the stud with a 5mm Allen socket and a ratchet. Just put the ratchet on and tighten, and I'm going to loosen this. Loosen that up; get the nut off, like this. The backside, here—I can just take a 17mm wrench, hold the stud from spinning while I loosen up the nut. Alright. Pull that nut off and slide that out.
We want to take these bolts out. I'm going to take the—loosen up the nuts, right here. Before I do that, I'm going to spray them down with some rust penetrant. I'm going to take an 18mm wrench, 18mm socket and a breaker bar. I'm going to loosen up the nut—both of these nuts—and loosen up the lower one. Before I take these nuts off, I'm just going to take a hammer and I'm just going to tap them—tap the bolts out. The reason I left the nuts on is so that I don't mushroom the end of the bolts. Otherwise, you won't be able to reuse them.
Then I'm going to take a punch and the hammer. Just hammer it out, like this. This is going to move a little bit. Watch your fingers. Then I'll hammer this lower one out as well. Make sure you check the brake hose. Make sure there's not too much tension on the brake hose. That's good. Take those out and set them aside. Alright. So, these strut poles are not slotted, so you don't really have to worry about marking this. If these were slotted, you'd want to take a marker and just go around where the bolt holes are, or where the knuckle goes into the strut, so that when you put it back together, the alignment isn't very far off. It'll be less far off.
We lowered the vehicle and we opened the hood. And now we want to take these four nuts out, but we want to make sure we don't touch the nut in the middle because if you took that out, the spring is going to come separated from the strut and then it could be dangerous. So, just focus on those four. I'm going to use a 14mm socket and a ratchet. When I take this last nut off, I'll loosen this up. Before I take it off completely, I'm going to want to grab underneath here. Grab the strut itself—if you can grab it by the spring and hold it up, while I take that last nut off. Or you can have a partner helping you do this. Then once it's off, slide it down, just like that.
Here's our old strut assembly. Here's our new strut and spring assembly from 1aauto.com. As you can see, they look very similar. They both have the same springs. They both have a mount at the top. The new one comes with new nuts. The brackets on the bottom are the same—it's the bracket that holds the brake hose on, and the bracket for the sway bar link. These look the same. Get yours at 1aauto.com and you'll be ready to rock and roll.
Alright. So, before I install this, I want to take these nuts off. Then we're going to slide underneath, here, and slide it up. Get the studs lined up. Take the nut. Once you get some of the nuts on, then you can let go with a strut assembly—let it hang. I'll take a—for the new nuts, they're 15mm, so I'll use a 15mm socket and a ratchet. Now I'm going to use the 15mm socket and a torque wrench. I'm going to torque these to 35 foot-pounds.
Now we're going to reinstall this to the knuckle. Just slide the knuckle up. You might have to grab underneath. If you're doing this on the ground, you might be able to use a floor jack to raise this up a little bit. Pull that up. Take the strut bolts. Get that one in and then get this one in. Get the nut. Install that one; install this one. Take my 18mm wrench, 18mm socket and ratchet. I'll snug this up before I torque it. Then with a torque wrench, I'm going to torque this to 85 foot-pounds. And same with the lower one.
We want to reinstall this bracket for the ABS wiring harness. Get that lined up. Take this bolt. Get that started. I'll use a 10mm socket and extension just to get this tightened by hand, and then I'll snug it up and just use a ratchet and snug it up—not too tight.
Then I'll take the brake hose; get this lined up. There is some little keyways in the hose, so it only goes on a certain way. It looks like it goes on like that. Just make sure it's not twisted at all—up top or down below. Take the clip. Slide the clip in.
I might have to take a small hammer and just give it a tap. Tap the clip in. Now slide this in position—top. You might have to move this stud down a little bit. Just grab it; slide it down, just like that. You can line that up. Take the 15mm nut. I'm going to use my 15mm ratchet wrench, and it's short Allen—4mm Allen wrench. Now snug that up. Take that off.
Now I'm going to take a 15mm socket on a torque wrench and tighten this nut down to 46 foot-pounds. Now I'm going to take a pry bar. Just get in between these studs, right here. Have that set against the floor. I'll take a 1 1/4 socket and a torque wrench, and I'm going to torque this axle nut to 221 foot-pounds. Be careful when doing this. It's a lot of torque. There we go. At this point, we would put the tire on, put the lug nuts on, lower the vehicle and torque the wheels.
Thanks for watching. Visit 1aauto.com, your place for DIY auto repairs, for great parts, great service, and more content.
Tools used
What's up, guys? I'm Andy from 1A Auto. In this video, I'm going to show you how to replace the rear shocks on this 2012 Ford Escape. If you need this part or other parts for your vehicle, click the link in the description and head over to 1aauto.com.
Open up the lift gate. Come back here. We want to take this panel off first. Just grab underneath. Just like that. Set it aside. Then just pull back this carpet. Slide that aside. This panel needs to come off, so we need to move the seats. All right. Just going to grab under the back of the seat here, pull up, fold it forward like that. I'm going to remove this panel. I just need a trim tool to gain access to this panel. Just get underneath here. It's just a clip holding this in, and just pry up, like that. Oh, the clip fell out. That's okay. All right. On the front side over here, there's a little pushpin. Over here, just get in behind the panel. Push this out. Here we go. All right. Now I can pry underneath this push clip. There you go. That one's pretty long, too. And then we can slide this forward a little bit. I'm going to have to pull the seat down. And here, keep the seat belt out of your way.
Just get in behind the panel and push it. Might have to use the trim tool. There's just clips holding it in. Just grab it and give it a good tug. If that door comes off, it's no big deal. Slide this forward and just slide this out. All right. Now we have the ability to access the top part of the shock, but before I take this off, we're going to actually go to the outside, take the wheel off, and start taking it off from underneath. I'm going to remove the wheel. I'm going to use a 19 millimeter socket and a breaker bar. Loosen up the lug nuts before I raise the vehicle up. All right. Now I'm going to remove the lug nuts. Grab the wheel. This wheel's stuck on there pretty good, so just going to put a lug nut on. Take a hammer and hit it from the back side. I can take the lug nut off and pull the wheel off.
All right. So we want to loosen up this nut right here. Before I loosen it up, I'm going to spray it with some rust penetrant. This is pretty rusty. I'm not going to take it off completely, because I still want to support the underneath here, because otherwise the spring is going to push down. Basically the shock is holding the spring from pushing the control arm down, so let's spray it first and then loosen up that nut. All right.
So I'm going to take a 24 millimeter socket and a breaker bar. Loosen up this nut. Now this side of the bolt has this little cage that will stop the bolt from spinning. If yours doesn't have that, you're going to want to put a wrench on the end of that. See, that's starting to spin, but it should stop. And it looks like it's actually going to break, so I'm actually going to get a wrench for this. I'm going to use a 13/16 wrench, or you can use a 21 millimeter wrench as well. All right. It's on there tight.
All right. So I'm just going to leave a couple threads on. This nut is nice and loose, so we'll leave that like that. So at this point I'm going to lower the vehicle. I want to support the lower control arm, because the spring is in there. When I put the jack stand underneath here and lower the vehicle, it's just going to raise this up a little bit, take the tension off the shock. From up top, everything's supported down below. We're going to take the top part of the shock off, use a 15 millimeter wrench. We can loosen this up. You can grab the center so that it doesn't spin. I'm just going to use some locking pliers. If you have a wrench that'll fit on that, you can use a wrench. I couldn't find one that fit. It must be like a six and a half. If you have a six and a half inch wrench. I mean, six and a half millimeter wrench. Then I can take a ratcheting wrench. Loosen this up. Oh, it's starting to spin again. Use the locking pliers.
So, because the top of the shock is spinning like that, I'm just going to use some locking pliers outside here. It's easier to grip onto, and just lock this right here. Then this is just going to go up against the side of the vehicle, and that'll hold that from spinning. And there we go. Got it off. I can take these locking pliers off, just like that. And because this is loose, just take this nut off. Slide that off. Slide the washer off. Slide the bolt out, and slide the shock. And pull it right out.
Here's the old shock. Here's the new shock from 1aauto.com. Comes with this strap for shipping purposes. You can take this off. You can just push down on it and slide it to the side, or you can take some side cutters and cut it. Pull that off. Throw that away. The mounting position is the same. As the shock extends it will be the same length. The top part is the same. The new one comes with these washers and grommets, just like the old. And it comes with a new nut, so that's the same as the old one. Get yours at 1aauto.com and you'll be ready to rock and roll.
So with these shocks, before I put them in, I'm just going to compress them and let them expand three times. That's just going to disperse the oil properly in the shocks. Do the same thing three times. Okay, now take the shock, make sure you put the washer and the rubber grommet on the top, slide that into the hole up there, and we're going to have to compress this a little bit. Just push it up. Get that to line up with the bolt. Take the washer and the nut, get that started. Okay, so we want to center this in the hole. So that's pretty good right there. Take the grommet. Now the grommet has two sides to it, this smaller part and this bigger part, and the same with the lower one. So you want the bigger part that's going to center the shock a little bit better.
Put that in there, and put the washer, now put the nut on. I'm going to take a ratchet wrench and tighten this up. This actually, the new nut, is actually a 16 millimeter, and once you see that center start to spin, take the locking pliers, try to just get on that up top. You could use some needle nose pliers. Just try to hold that until it gets snug, and we're going to torque it. So when I tighten the shock, this upper part is just spinning, so what I can do is take one of these rubber strap wrenches, just get this tight, and I'm just going to have a partner hold this for me while I torque it. And over here. I can torque this to 30 foot pounds. And that's good. At this point I'm going to raise the vehicle. It's safe to do so. Now I'm just going to take a 24 millimeter socket and a ratchet, just tighten this down. I don't really need the wrench for this, because that cage is going to stop that from spinning.
Now I'm going to take a torque wrench, and I'm going to torque this to 129 foot pounds. That's good. Now we're all set on the inside here, so put this interior body panel back on. Just slide this in. Once it's in position, you can start pushing it on. Just clips in place. The weather stripping right here has to go over the panel, so just grab it and fold it over just like that. Make sure that hole lines up right there. Push the seat back there. Now this little push clip is going to go right in here just like that, and I'm just going to slide this pushpin out. Get this in position. Push that down, and then push the other push clip over here. There we go. Close that door, push this seat back underneath. Just take this trim piece and line this up. Just like that. Push it on. Now we can take the carpet. Put that back in position and take this door that fell off and slide that back on.
Now we're going to put the tire back on. Put the lug nuts on. All right. Just going to use the 19 millimeter socket and tighten these down by hand. I'm going to take my socket and a torque wrench. I'm going to torque these to 100 foot-pounds, and I'm going to do it in a star pattern so that the wheel gets tightened down evenly. Just going to go around again. Make sure everything's tight.
Thanks for watching. If you want the parts to do it yourself, check out 1Aauto.com, the place for DIY auto repair.
PSA85604
Everything came in time, great price, car drives like new again I would highly recommend 1A auto.
Works great, rides nice.
Good efecty...
Good value. all parts fit as OEM. unknown durability but performance is good.
TRQ is the manufacturer of these parts. This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
