★★★★★
August 19, 2025
Good product
Good replacement part. Has worked as expected for a long time now. No complaints.
Replaces
Replaces Ford Mazda Mercury Front 12 Piece Steering & Suspension Kit TRQ PSA65045
$404.95
Replaces Ford Mazda Mercury Front 10 Piece Steering & Suspension Kit TRQ PSA63360
$389.95
Replaces Ford Mazda Mercury Front 12 Piece Steering & Suspension Kit TRQ PSA34488
$389.95
Replaces Ford Mazda Mercury Front 8 Piece Steering & Suspension Kit TRQ PSA63544
$374.95
Replaces Ford Mazda Mercury Front 6 Piece Suspension Kit TRQ PSA63635
$354.95
Replaces Ford Mazda Mercury Front 4 Piece Control Arm with Ball Joint Set TRQ PSA65867
$340.95
About TRQ:
TRQ is a trusted brand dedicated to making every repair a success story by combining premium parts with easy installation. Each TRQ part is engineered by a team of automotive experts to meet or exceed OEM standards, delivering enhanced performance and maximum longevity. With rigorous in-house testing, the brand ensures superior fit and function across every product line. TRQ also provides customers with best-in-class, step-by-step installation videos—so you can complete repairs with confidence, whether you're a first-time DIYer or an industry professional.
Returns: Parts with electrical components cannot be returned once installed.
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks!
In this video we're going to be working with our 2001 Ford Ranger, 4.0-liter V6. We're going to be changing out the rear ABS sensor. This information is the same from 1990 to 2007.
If you like this video, please click subscribe. We have a ton more information on this truck as well as many other makes and models. If you want this part for your vehicle, you can follow the link in the description to 1AAuto.com.
Here are the items you'll need for this repair: flat blade screwdriver, 10mm socket, and a ratchet.
The rear ABS sensor is located in the top of the rear differential on our truck. You may be able to access this from the ground, but we've raised and supported our vehicle to make it easier to show you. You'll have to remove a 10 millimeter bolt at the top of the sensor. Once the bolt is out, you'll want to use a small, flat blade screwdriver or a small pry bar to pry the sensor out of the differential housing. Lift up, and push the connector off of the sensor.
Here we have the old, rear ABS sensor that we removed from our 2001 ranger and our new part available from 1AAuto.com. As you can see, these parts are exactly the same. Our old part, where it is a magnetic sensor, does have some metal shavings from the differential stuck to it, and that's to be expected.
If these sensors go bad, it will turn your ABS light on, and cause a malfunction of the ABS brakes. It will show as "no wheel speed signal coming from the rear end of your vehicle". If you're having an ABS issue that you've narrowed down to your rear ABS sensor, this new part from 1A Auto is going to go in direct fit just like your original equipment and fix you up right.
Reinstall the ABS sensor into the differential, and be sure that it sits down wholly. Line up and tighten down the 10 millimeter bolt at the top. Reconnect the electrical connector.
Thanks for tuning in. We hope this video helped you out. Next time you need parts for your car, please visit 1AAuto.com. Also check out our other helpful how-to and diagnosis videos.
Good replacement part. Has worked as expected for a long time now. No complaints.
Works great.
I would recommend it. It was a perfect fit. If someone does not know how to install one, they have an excellent resource video available. I always choose 1A.
Quality Hardware and performs as expected.
Worked
Worked great.
1A auto is my truck store to go to
Excellent replacement part easy to manage with the old sensor removed
Perfect fit and solved the problem.
Perfect fit.
Nope
I never had any problems with the breaks at all just the ABS light coming on but the new sensor did take care of the issue. Thanks to the videos on 1aauto I took care of the repair.
This ABS sensor is our DIY Solutions brand sensor, and the one currently listed for $44.95 is a genuine Ford Motorcraft part. Both come with the same lifetime warranty and will fit and function just like your original.
Thanks for your inquiry. Written and video installation instructions are found on the product page under the "How-To & Tools" tab. We're constantly adding new installation video instructions. If we do not have one for your vehicle on the product listing page, please check again at a later time or check our Video Library to see similar repairs here: <a href="https://www.1aauto.com/videos" target="_blank">https://www.1aauto.com/videos</a>
Thank you for contacting us. According to our specifications, this part is listed to fit the 1999 Ford Ranger.
On the front they are on each spindle arm. On the rear it is on the center of the pumpkin.
