Replaces
Frequently bought together
Returns: Parts with electrical components cannot be returned once installed.
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Hi, I'm Mike from 1A Auto. We've been selling auto parts for over 30 years. We're dedicated to delivering quality auto parts, expert customer service, fast and free shipping, all backed by our 100% satisfaction guarantee. Visit us at 1AAuto.com, your trusted source for quality auto parts.
Right here on the driver's side on the side of the transmission is your output speed sensor, and it has a connector on it which has a tab on the top and the bottom, which you're going to want to disconnect first. This one the tab is actually broken off at the top, so it looks like somebody has been here before or it, or it's just a little brittle. But on the bottom, you just want to pry the tab down just slightly, and it'll slide right off.
On the sensor itself, there's an eight millimeter bolt in the bottom of it which you can access with an eight millimeter socket. Usa a 6” extension and a 3/8” ratchet to remove it. Once you get it loose, it will spin right out by hand. At this point, you might be able to turn the sensor so that it breaks free from its grip. This one's a little stuck.
Now you can see that we're using some pliers and possibly a screwdriver. Usually one of these will work. If not, you can use a small pry bar and pry against the transmission, or just kind of turn it 90 degrees and hopefully pop it’ll out. All right, so now we have the new sensor, and we're just going to slide it right in the hole. It's going to take a little bit of force to get it in. You can try turning it. All right, now we'll take our bolt and thread it in by hand. You always want to start it by hand so you don't accidentally cross thread it into the hole. Now you can take your eight millimeter socket, your extension, and ratchet and tighten it up. You don't have to get too crazy with it. Just kind of tighten it with your wrist. As soon as you start moving your elbow, you're probably putting too much force on it. Now we can snap the connector back on just like that. The job is done.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
VSA92946
